Set The Sleep Timer; Adjust Display Brightness - Philips DC190/79 User Manual

Tip
• You can press TUNING+/- to adjust interval
to repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALARM 1 or ALARM 2 .
The alarm stops but the alarm settings
»
remain.
View the alarm settings
1
Press ALARM 1 or ALARM 2 .

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
When the sleep timer is activated, the
»
display shows
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
When the sleep timer is deactivated,
»
disappears on the display.

Adjust display brightness

1
Press BRIGHTNESS CONTROL
repeatedly to select different levels of
display brightness.
EN
10
.
7 Product
information
Note
• Product information is subject to change
without prior notice.
Specifi cations
Amplifi er
Rated Output Power
Signal to Noise Ratio
MP3 Link
Tuner
FM
Tuning Range
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Selectivity
Total Harmonic
Distortion
Signal to Noise Ratio
General information
AC power (power
adaptor)
2X1.5 W RMS
>55 dB
0.6 V RMS
10 kohm
87.5 - 108 MHz
50 KHz
<22 dBu
<45 dBu
<28 dBu
<3%
>45 dB
Input: 100-240V~,
50/60Hz, 0.5A;
Output: 6.5V
1.3A;
Brand name:
Philips;
Model No.:
AS100-065-
AM130