Light Source - BMW R nineT 2019 Rider's Manual

bottom and remove it towards
8
the top.
112
Position the light housing 1
z behind the tab 2 and swivel it
towards the bottom.
Align the light housing 1 cent-
rally.
WARNING
Deformation of the clamp
due to heavy impact on the
light housing
Risk of accidents due to inad-
equately secured reflector
Avoid all heavy impacts.
Push the screw 2 upwards us-
ing the screwdriver.
Swivel the light housing to-
wards the rear.
The clamp 1 engages with the
light housing.
Tighten screw 2.

Light source

Replacing bulb for low-
beam and high-beam
headlight
Switching off ignition (
Place the motorcycle on its
stand on firm, even ground.
Removing the light housing
( 111).
Disconnect the connector 1 for
low-beam headlight and high
beam.
Pull off the rubber seal 2 from
the light housing.
39).