hestan KRB Series Installation Manual page 15

CONNECTIONS
The appliances are delivered from the factory for operation at 110V-120V AC - 60Hz (US
and Canada). They are provided with a suitable supply cord and plug to be connected to an
appropriate 15A socket (US and Canada) provided with an effective grounding.
A circuit breaker should also be installed and should be easily accessible so that it can be easily
switched off before performing any installation or maintenance.
To connect to the water supply system (for appliances equipped with ice makers) a 1/4"
waterline with accessible shut-off valve must be supplied.
The appliance is provided with a water adapter elbow which is suitable for high water pressure
and complies with appropriate regulations. The water filter cartridge provided with the
appliance should be installed according to the accompanying instructions.
KRP, KRB models have the water filter mounted above the refrigerator compartment above the
glass panel.
KFC models are provided with a water filter assembly which must be mounted outside the
unit.
Use only the new adapter which is supplied with the appliance. The solenoid connection
on the appliance looks like 3/4" diameter but is metric threaded. A standard garden hose
threaded connector such as a braided stainless hose found at typical hardware stores will strip
or damage the solenoid threads. Use only the supplied 1/4" quick connect elbow adapter for
connecting a 1/4" copper or polyethylene source water line to the appliance.
Electrical cord length: 78-3/4" [2000 mm]
Water connection line length: 98-3/8" [2500 mm]
See following page for additional information.
E
W
KFC models
(CONT.)
E W
Water filter to
mount in cabinet
W E
KRB models
E
W
E
W
KRP models
Water connec-
tion in base of
unit near front
2019 Hestan Commercial Corporation
EN
E
W
13