Do you have a question about the Two Wheels Folding Electric Scooter and is the answer not in the manual?
Questions and answers
randolph
March 19, 2025
when i press and hold the button scooter does not come on after fresh charge
1 comments:
Mr. Anderson
March 19, 2025
The Tomoloo Two Wheels Folding Electric Scooter may not turn on after a fresh charge if:
1. The battery is not properly connected or has a poor connection. 2. A different battery model or brand was used, which may cause compatibility issues. 3. The battery contacts are dirty or obstructed, preventing proper power flow. 4. The battery compartment was opened incorrectly, leading to a short circuit or damage. 5. The scooter experienced a malfunction, requiring inspection or repair.
If the issue persists, checking the battery connection and ensuring only the original charger and battery are used is recommended.
This answer is automatically generated
Terence Straight
June 26, 2025
Got 40 flashing up on display on tomoloo F2 electric scooter.
How do I reset it and where is reset button located?
Subscribe to Our Youtube Channel
Related Manuals for Tomoloo Two Wheels Folding Electric Scooter
3. Understand the composition and safety of two wheel electric scooter. 2. This manual can be also downloaded from the website: www.tomoloo.com If you have any questions or need more information, please contact the franchised dealer or after- sales service.
Chapter 1 Chapter 2 Products and components Function Icon and description components User manual x1 Screw M3 x4 Knob x2 Hex wrench M5 x1, M3 x1 Charger adapter x1 *Please check carefully that the parts in the package are intact. - 04 - - 05 -...
Chapter 3 Control panel Installation Guide Headlight status 1. Install the brakes to correct position with the Hex wrench (M5 in the tool bag). Batter y Bluetooth status Speed gear Speed Control instructions 2.Install the handlebars, pay attention to the installation direction. Use control panel to control scooter, the specific features are as follows.
Page 6
3.Hole the scooter upright,to ensure that the lock will not affected,please keep the folding-spanner(The blue part of the image) 1.Fasten the scooter standpipe and fold out the kickstand 2.Install the handlebar to the standpipe at the bottom. Pull the folding-spanner to the top,then te scooter is completely locked. 3.Use the hex wrench in the mounting box to lock the 4.After the installation is completed, switch on screws on both sides...
Chapter 4 Chapter 5 Charging instructions How to ride the two e-scooter *There are risks of falling and injur y when study riding, so please wear a helmet and protective gear as shown in the picture. Open rubber cap. Insert in the charging plug. After charging is completed, close the rubber cap 1.
Chapter 6 Riding security 3.When the electric scooter is sliding, the other foot steps 4.Release the throttle can slow down the speed, and on the pedal. After the feet step on the pedal, slightly press automatic energy recover y system can help to slow the throttle (speed above 5km/h will start the throttle).
Chapter 7 Folding and Transportation Do not press on the accelerator pin Avoid barriers while driving. while walking with the e-scooter. Pull thesafety-lock(The red part of the image) up meanwhile holding the standpipe, then open up the folding-spanner(The blue part of the image), aim it at the bell and the fender hook, then buckle the bell with the back-fender.
Page 10
Warming Reminder Do not tr y to do any dangerous movement. Forbidden to step or trend on the back Forbidden to press the disc-brake. -fender. Forbidden to drive on the driveways or Forbidden to rotate the handle strongly in crowded residential areas. while driving with high speed.
3. Only use the original charger for charging, otherwise it may cause damage or fire. national standards and regulations for electric scooters, Tomoloo shall not be liable for any liability, personal injur y, accident, 4. Inappropriate disposal of used batteries may result in serious environmental pollution, disposal of waste batter y packs legal dispute, and all other unfavorable events resulting from the use of violating the instructions indicated in this manual.
Page 12
Handle shake debug If there is a crack in the body of the electric scooter, wipe it with a small amount of water with a soft cloth. If it is difficult to If you feel the standpipe is loose and shakes when you are riding, please use the M5 hex wrench to reinforce clean, you can use a toothbrush with toothpaste to brush it repeatedly and then use a damp cloth to clean it.
Chapter 10 APP Download Guide WARNING To reduce the risk of injur y, user must read instruction manual. In the APP application librar y, search and scan the QR code below to download and install. Bluetooth password: 000000 1.Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials. 2.Store Indoors When Not in Use.
Page 15
Cleaning and user maintenance shall not be made by children without supervision. 2. This manual can be also downloaded from the website: www.tomoloo.com 3. WARNING: For the purposes of recharging the batter y, only use the detachable supply unit (model: FY- 4202000) provided with this appliance.
Need help?
Do you have a question about the Two Wheels Folding Electric Scooter and is the answer not in the manual?
Questions and answers
when i press and hold the button scooter does not come on after fresh charge
The Tomoloo Two Wheels Folding Electric Scooter may not turn on after a fresh charge if:
1. The battery is not properly connected or has a poor connection.
2. A different battery model or brand was used, which may cause compatibility issues.
3. The battery contacts are dirty or obstructed, preventing proper power flow.
4. The battery compartment was opened incorrectly, leading to a short circuit or damage.
5. The scooter experienced a malfunction, requiring inspection or repair.
If the issue persists, checking the battery connection and ensuring only the original charger and battery are used is recommended.
This answer is automatically generated
Got 40 flashing up on display on tomoloo F2 electric scooter. How do I reset it and where is reset button located?