Power Connection; Antenna Connection - HARWA LC-20H3S Operating Manual

Power connection

Plug into AC outlet.
AC cord
1. Connecting the female plug to the AC socket on AC adapter.
2. Connecting the AC adapter to the DC power input of the set.
3. Connecting the male plug to the wall outlet as illustrated.
Note:
Always turn the Power Switch of the LCD TV set to OFF when connecting the AC adapter.
This product should be operated only from the type of power source indicated on the marking label.
Always unplug the AC adapter from the product and power outlet when not using for a long period of time.

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon
the screen. Total darkness or a reflection on the picture screen
may cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Optimum reception of color requires a good signal and will
generally mean that an outdoor aerial must be used. The exact
type and position of the aerial will depend upon your particular
area.
Note:
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio
wave conditions.
The aerial cable should not be bundled with the power cord and the like.
Household
power outlet
Connect to the DC input
socket of the product.
Be sure to insert plug into
AC adapter
the end fully and confirm
it is reliable
75-ohm coaxial cable (round cable)
300-ohm twin-lead flat feeder
Preparations
To antenna
input terminal
( )
(continued)
4