Connections; Cautions Before Connecting; Connect 21-Pin Euro-Scart (Av1 In) - HARWA LC-20H3S Operating Manual

Connections

Cautions before connecting

Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their
terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.

Connect 21-pin EURO-SCART (AV1 IN)

Interface on the rear of the Unit
DC 12V VGA
21-pin Euro-SCART (RGB)
1. Audio right output
2. Audio right input
3. Audio left output
4. Common earth for audio
5. Earth for blue
6. Audio left input
7. BLUE input
How to connect:
Connect the 21-pin Euro-SCART between the unit and decoder.
To watch decoder
1. Turn on your LCD TV , press Source
2. Press CH+/- to select AV1 and press VOL+ to confirm or wait for about 5 seconds.
3. Turn on the decoder.
4. Set the Scart Output item (in System menu) to TV and select a proper channel through
the Scart Output Channel item. For detailed operation, please refer to [Setting Scart
Output] in page19.
9
- - S VIDEO
PC AUDIO
L
VIDEO
AUDI O
AV2 IN
Decoder
8. AV control
9. Earth for green
10. Not used
11. GREEN input
12. Not used
13. Earth for red
14. Not used
button on the remote control.
PHONE
R L R
VIDEO
AUDIO
AV OUT
15. RED input
16. RGB control
17. Earth for video
18. Earth for RGB control
19. Video output
20. Video input (PAL/SECAM/NTSC)
21. Plug shield
(SCART)
AV1
20 18 16 14 12 10 8 6 4 2
19 15 13
17 11 9 7 5 3
21
21-pin Euro-SCART
connector
SOURCE
RF
1
TV
AV1
AV2
SVIDEO
D-Sub
Video1