Table of Contents
Advertisement
3 Installing the Splitterless DSL Modem
3.1 Overview
The procedures in this chapter apply to those customers who
install their own microfilter-to-phone connections. If a DSL
technician is performing the wiring, proceed to
Powering the
Modem.
Note: Do not install a microfilter on the DSL modem line.
The splitterless installation requires the placement of a
microfilter on every telephone set, answering machine, or
telephone device (i.e., analog modem) in your home. However,
several phones and, or telephone devices may share the same
microfilter. Microfilters and modular adapters are included
with your modem package.
CAUTION:
Using more than five microfilters is not recommended and can impact
the quality of your telephone service.
Note: The following installation procedure and figures represent a
possible home scheme. Not all homes will follow this convention. It is
recommended that any DSL inside wiring be performed by a DSL
technician.
Section 5,
7
Advertisement
Table of Contents
