Table of Contents
Advertisement
8. For an Ethernet connection, connect one end of the
Ethernet (crossover) cable, part number FC9660CB23,
to the RJ-45 slot titled DATA on the back of the DSL
modem and connect the other end of the Ethernet cable
to the network interface card in back of the computer.
See
Figure 3-5
Note: The term "straight," when used to describe the cable
assemblies, is defined to mean that the transmit and receive pin-
outs remain the same entering and exiting the cable assembly.
The term "crossover" means that the transmit and receive pin-out
pair will be reversed or crossed over in the cable assemblies
FC9660CB23
Crossover
supplied
NIC Cable
Connection
DSL Modem
FC9660RA12
DATA
DATA
LINE
LINE
Data
Line
Figure 3-5: Ethernet Cable Connection
10
for examples.
Microfilter
RJ-11 Line Cord
FC9660CB26
2-Outlet
Modular Adapter
Existing
RJ-11
Wallplate
Telephone
Advertisement
Table of Contents
