Listen To Fm Radio; Tune To Fm Radio Stations; Program Radio Stations Automatically; Program Radio Stations Manually - Philips DCM1130 User Manual

6 Listen to FM
radio

Tune to FM radio stations

Note
•
Make sure that you have connected and fully extended
the supplied FM antenna.
1
Press TUNER.
2
Press and hold
tune to a radio station.
3
When the frequency starts to change,
release the button.
» The FM tuner tunes to a station with
strong reception automatically.
4
Repeat steps 2-3 to tune to more stations.
To tune to a weak station:
Press / repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
In FM tuner mode, press PROG for 3 seconds
to activate automatic programming.
» [AUTO] (auto) is displayed.
» The unit stores all the FM radio stations
automatically and then broadcasts the first
preset radio station.
12 EN
/ for two seconds to
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROG to activate programming
mode.
3
Press ALB/PRESET+/- to select a number
from 1 to 20 for this radio station, then
press PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Tune to a preset radio station

Press ALB/PRESET+/- to select a preset
number.