Huawei AR530 Series Quick Start Manual page 5

Step 2 Loosen the screws on the front top cover with a Phillips screwdriver, remove the front top cover, and keep
it in an appropriate place for later use.
1
Step 3 Hang the router onto the topmost screw on the 530 horizontal rack-mounting kit and adjust position of
the router to align the mounting holes on the router with those on the rack-mounting kit. Use two M4x30
screws to fix the router onto the rack-mounting kit and tighten the top.
Step 4 Install two floating nuts on each front mounting rail of the cabinet. Leave four mounting holes between
the two floating nuts on the same mounting rail.
NOTE
The length of six adjacent mounting holes may not be 2 U. Observe the scale ticks on the mounting rails when installing floating
nuts.
You can use a flat-head screwdriver to install floating nuts.
3
Step 5 Use the Phillips screwdriver to install M6 screws on the two lower floating nuts, and leave 2 mm of the
screws out of the floating nuts.
Step 6 Move the router into the cabinet with one hand supporting bottom of the router, and hook the brackets at
both sides of the mounting kit on the M6 screws.
Step 7 Use the Phillips screwdriver to tighten the lower M6 screws and then the upper M6 screws.
2
1
5
2
FE 5
FE 4
FE 3
FE 2
N
L3
L2
L1
4
7
6
4
FE 7
FE 6
ge Surv ival
Pow er Outa
MON ITOR
GE 1
GE 0 TX
RX B
B A DI-1
TX A DI-0
RX RS48 5-1
RS48 5-0
CO NS OL E
×4
2 U