Mercedes-Benz GLS Operator's Manual page 219

Hide thumbs Also See for GLS:
Table of Contents

Advertisement

Information on detecting damage on a
parked vehicle
If a collision is detected when the tow-away
alarm is armed on a locked vehicle, you will
receive a notification in the multimedia system
when you switch on the ignition.
You will receive information about the following
points:
The area of the vehicle that may have been
R
damaged.
The force of the impact.
R
The following situations can lead to inadvertent
activation:
The parked vehicle is moved, e.g. in a two-
R
story garage.
%
Deactivate the tow-away alarm in order to
prevent inadvertent activation. If you deacti‐
vate the tow-away alarm, damage detection
will also be deactivated.
%
In the case of severe battery discharging,
the function for detecting damage on a
parked vehicle is automatically deactivated
to facilitate the next engine start.
System limits
Detection may be restricted in the following sit‐
uations:
The vehicle is damaged without impact, e.g.
R
if an outside mirror is torn off or the paint is
damaged by a SmartKey
An impact occurs at low speed
R
The electric parking brake is not applied
R
Notes on parking the vehicle for an extended
period
If you leave the vehicle parked for longer than six
weeks, it may suffer damage through disuse.
The 12 V battery may also be impaired or dam‐
aged by heavy discharging.
%
Further information can be obtained at a
qualified specialist workshop.
Driving and parking 217
Standby mode (extension of the starter bat‐
tery's period out of use)
Standby mode function
%
This function is not available for all models.
If standby mode is activated, energy loss will be
minimized during extended periods of non-oper‐
ation.
Standby mode is characterized by the following:
the starter battery is preserved.
R
the maximum non-operational time appears
R
in the media display.
the connection to online services is interrup‐
R
ted.
the ATA (anti-theft alarm system) is not avail‐
R
able.
the interior motion sensor and tow-away
R
alarm functions are not available.
the function for detecting damage on a
R
parked vehicle is not available.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents