Mercedes-Benz GLS Operator's Manual page 200

198 Driving and parking
Within the reset display if the previously
R
active drive program is unsuitable for the
transport of a roof load
For further information on the reset dis‐
play, see ( page 198).
/
Selecting the drive program
Press DYNAMIC SELECT switch
#
or backwards.
The drive program selected appears in the
multifunction display.
Configuring DYNAMIC SELECT (multimedia
system)
Multimedia system:
© Settings Vehicle
4 5 5
DYNAMIC SELECT
5
Setting drive program I
Select Individual Config..
#
Select and set a category.
#
Switching the reset display on/off
Switch Request at Start on or off.
#
Function on: the next time the vehicle is started
a prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an addi‐
tional prompt appears asking if the function
should remain deactivated.
1 forwards % The prompt appears only if the previously
active settings deviate from the standard
settings.
Function off: the next time the vehicle is star‐
ted the A drive program is set automatically.
The ECO start/stop function is activated auto‐
matically.
% This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and Eco
start/stop setting for the previous journey
be saved for the respective user profile.
Displaying vehicle data
Multimedia system:
© Info
4 5
Select Vehicle.
#
The vehicle data is displayed.