Table of Contents
Advertisement
VideoRay Pro 3 User's Manual
5.7
POST-DIVE INSPECTION
A Post-Dive inspection should be carried out after every dive.
1)
Make sure the VideoRay is securely on-board.
2)
Power Down the system.
3)
Unplug the connections.
4)
The vehicle should be visually inspected following each dive to ensure that no mechanical damage has
occurred.
5)
Visually check through the ports to ensure that no water has entered the pressure housings.
6)
Check that the propeller shafts have not been fouled with material such as fishing line, string, seaweed,
or other debris.
7)
If VideoRay has been used in salt water, thoroughly rinse the vehicle with fresh water prior to
being stored away. Turn the vehicle upside down while rinsing to let water drain from the
pressure sensor cavity under the float block.
8)
Inspect the tether for cuts, nicks and / or kinks in the outer shell. Store the tether properly for the next
use.
9)
Store all components securely.
November, 2007
12
- Quick Links:
- About Your Videoray
Hide quick links:
Advertisement
Table of Contents
