Using The Car Adapter; Powering Your Remote Control; Power Supply - Philips PET718/77 User Manual

Power supply

Using the AC / DC adaptor
Connect the supplied adapter to the set
and the main power supply (as shown).
✔
TIP
To avoid damage to the player, switch off before plugging or unplugging the
AC adaptor.

Using the car adapter

Connect the supplied car adapter to the set and the
car cigarette lighter outlet.
✔
TIP
• To avoid damage to the player, switch off before plugging or unplugging
the car adaptor.
• When connecting with car power (cigarette lighter) adaptor, be sure the
input voltage of the adaptor is identical with car voltage.
• Make sure the temperature is below 35 o C when the DVD player is con-
nected to DC 16.0V in a car.

Powering your remote control

1 Open the battery compartment. Remove the protec-
tive plastic tab (first time users only).
2 Insert 1 x lithium 3V battery, type CR2025, then
close the compartment.
CAUTION
-
Batteries contain chemical substances, so they should be disposed of
properly.
-
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
-
Incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to burst.
PREPARATIONS