Gehl Z17 GEN:2 Operator's Manual page 83

13-9-2. Changing the blade width
The blade width can be adjusted to 37.4 in. or 50.4 in.
(950mm or 1280mm) by changing the positions of the pins.
1) Raise the blade to its stroke end.
2) Change the positions of the pins as illustrated in the fig-
ure at the right and hold the extension blades to change
the blade width.
IMPORTANT
Installing the pin improperly may cause the pin to fall
off during work.
When the blade is widened
When the blade is narrowed
2-43
13. Operating Instructions
020348-00X
Extension blade
Pin
Pin
020349-00E
Pin
Pin
Pin
020350-00E
Courtesy of Machine.Market