Gehl Z17 GEN:2 Operator's Manual page 182

25. Procedures for Maintenance
25-8-2. Replacing the air cleaner element
Never attempt to replace the air cleaner element
while the engine is running.
Replace the air cleaner element after the engine
has been stopped and has cooled sufficiently.
1) Open the engine hood.
2) Remove the clips (1) and remove the dust cup (2).
3) Remove the element (3).
Cover the connector side at the back of the air cleaner
body using a clean cloth and tape to prevent dirt from
entering.
4) Clean the dust cup (2) and the inside of the body.
Remove the protective cloth and tape used to cover the
air cleaner body.
5) Install a new element (3).
6) Install the dust cup (2), using the arrow mark on it, to
confirm proper alignment.
7) Close the engine hood.
3-54
(2)
(1)
020297-00X
(3)
020298-00X
Courtesy of Machine.Market