Fresca FFT1032CH Installation Instructions

Single hole faucet

INSTRUCTIONS

FFT1032CH

Single hole faucet

Important

We recommend that this product is installed by a qualified professional contractor.

●

Please check this product immediately to ensure that it has not been damaged and is complete.

●

Please flush the water system to ensure that no debris or any other impurities can enter the taps.

●

Turn off water supply before commencing work.

●

Please read these instructions carefully and keep for future reference.

Maintainance

We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula

too frequently. The product should always be cleaned with soapy water and rinsed with clean water and dried with a soft cloth.

Unit:inches

Table of Contents

Do you have a question about the FFT1032CH and is the answer not in the manual?

Page 1 INSTALLATION INSTRUCTIONS FFT1032CH Single hole faucet Important We recommend that this product is installed by a qualified professional contractor. ● Please check this product immediately to ensure that it has not been damaged and is complete. ● Please flush the water system to ensure that no debris or any other impurities can enter the taps.
Page 2 Installation FAUCET HANDLE CARTRIDGE FAUCET RETAINING CARTRIDGE COVER GRUB SCREW SUPPLY LINES WASHER To remove the cartridge. First shut off the water supply to the tap. 1: Pull out the cap from the handle. 2: Loosen the grub screw in handle, but do not remove it. RUBBER WASHER 3: Take off the handle, unscrew the cartridge cover.