Table of Contents
Advertisement
VESDA ECO-EX Detector by Xtralis
Service and Maintenance
Before servicing the ECO-EX product, refer to the related conditions of
use for the appropriate certification as indicated in the previous pages of
this document. Failure to adhere to these conditions of use will invalidate
the certification of the product and could potentially render it unsafe for
use in hazardous areas.
All service and maintenance operations of the ECO-EX must be performed within
the limits of the local site regulations. If the local site regulations conflict with or
contradict the instructions given in this or the VESDA ECO Product Guide, refer to
your local Xtralis sales office for advice.
The details of the service and maintenance operations of the ECO-EX are detailed
in the VESDA ECO Product Guide supplied.
monitoring or control of the product should be undertaken from a safe area using
the Modbus interface supplied, not the USB interface on the ECO-EX unless
otherwise authorised to do so by the site safety authority.
The internal RTC backup battery is NOT user replaceable, in the event of a
reported failure, replace the Enclosure Lid PCB assembly in its entirety.
The VESDA ECO-EX guard MUST be fitted at all times when the product
is energized in the Hazardous unless otherwise authorised by the site
safety authority.
17937_05
Service and Maintenance
Product Guide Addendum
Operations requiring diagnostic
9
Advertisement
Table of Contents
