View Alarms/Warnings Screen; Clear Errored Seconds Screen - Wegener DTV742 User Manual

DTV 742 User's Manual
Second-level Screen
Where XXXXXX is the unit's six-digit serial number and YYY is the version
number of the unit's currently installed application software.
Press the ESC key to return to the Home Screen.
View Alarms/
Warnings
screen
Press the ENT key to view any active alarms or warnings on the second-
level Alarms/Warnings Message screen.
Press the
Input Setup.
Press the ESC key to go to the Home Screen.
Second-level Screen
Alarms/Warnings Message Screen
Any active alarms or warnings are described here.
Press the
Press the ESC key to return to the View Alarms/Warnings screen.
Clear
Errored
Seconds
screen
This screen only appears if the errored seconds counter is non-zero. Other-
wise the next screen, Program Setup is displayed.
Press the ENT to clear the errored seconds counter (for all RF inputs).
Press the
Press the
Press the ESC key to go to the Home Screen.
wegener.com
S/N: XXXXXX
VER: YYY
View Alarms/Warnings
key to go to Clear Errored Seconds (if counter is non-zero) or
No Alarms or Warning
key to view the next alarm or warning (if more than one).
Clear Errored Secs
Press<ENT>
key to go to the Input Setup screen.
key to go to View Alarms/Warnings.
35 800057-01 Rev. B