Installation - BPW ECO Plus 2 Operating And Installation Instructions

16
Digital ECOMETER · Operating and Installation Instruction

Installation

1. Unscrew the hub cap with a 120 mm hub cap spanner.
Important: bayonet lock!
Do not use an impact driver.
Turn the hub cap back from position 1 to position 2 by turning
anti-clockwise about 30°. The hub cap lifts clearly off the ECO
unit in this position and can be pulled off axially.
2. Remove the clasp locking ring and retaining key from the axle
screw.
3. Insert a new retaining key with integrated magnet into the
recess in the axle screw and the gearing of the toothed lock
washer.
Do not turn back the axle screw.
04.001.21.25.0 V4 02.04.2014
1
2