Tri-Pack
50 Series
Non Handed Door Closer
Regular Arm
Installation
See Page 2
Right Hand Door - RH
Left Hand Reverse - LHR
Top Jamb
Installation
See Page 5
Left Hand Door - LH
Right Hand Reverse - RHR
Parallel Arm
Installation
See Pages
Left Hand Door - LH
Right Hand Reverse - RHR
Spring Power Adjustment Screw
51(BF) Series Only
"BC" Valve
1-4
Closer
Size
Stamp
Pinion Cap
Installation Instructions
80-9350-2502-010 (12-09)
An Incorrectly installed or improperly adjusted
door closer can cause property damage or
personal injury. These installation instructions
should be followed to avoid the possibility of
misapplication or misadjustment.
"DL" suffix (Delayed Action) is an optional
feature. A separate sheet is supplied
showing closer adjustments.
NOTE: For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
instruction sheet for installation sequence
and closer adjustments only.
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°.
3 & 4
These door closers should NOT be
installed on the exposed side (weather
side) of exterior doors.
#7
Metal
Standard Components
Closer Body
"L"Valve
"S"Valve
3/16"
1/4-20
Wood
Arm Assembly
Connecting Rod
Main Arm
Soffit Plate
289A Soffit Plate
Used with Parallel
Arm Closers Only
Non Hold Open Models
Sized
(Sizes 2,3,4,5,6)
52BC
Weaker
-
53BC
54BC
55BC
Stronger
56BC
+
Regular Arm
Installation
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Top Jamb
Installation
See Page 5
Right Hand Door - RH
Left Hand Reverse - LHR
Parallel Arm
Installation
See Pages
3 & 4
Right Hand Door - RH
Left Hand Reverse - LHR
Self Drilling Screws
Wood and Metal
Sleeve Nut and Bolt
For Wood drill 3/16 hole
Drill 9/32 thru from Closer Side
Thru Bolt and Grommet Nut
Machine Screws
Drill 9/32 thru from Closer Side
#7 Drill, 1/4-20 Tap
Optional Components
Adjusting
Tube
Elbow
Screw
C o
Adjustable
(Sizes 3 thru 6)
51
(Sizes 1 thru 4)
51BF
(Optional)
3/8 Drill other side
3/8 Drill other Side
v e
r