Telephone Module - AEV Synapse Manual

Telephone module

AEV Broadcast Srl – via della Tecnica 33 – 40050 Argelato (BO) Italy AEV Broadcast
AEV SYNAPSE - ON AIR CONSOLE
Web site www.aev.eu Web site
1 - Connector RJ45 for telephone service Connector RJ45 for telephone service
2 - Connector RJ45 for telephone line. Connector RJ45 for telephone line.
3 - Button for the fine adjustment of the input
levels (max. attenuation: - 12dB). levels (max. attenuation:
4 - Button for the fine adjustment of the input Button for the fine adjustment of the input
levels (max. amplification: +12dB). levels (max. amplification: +12dB).
5 - Dip-switch for telephone channel set switch for telephone channel set-up (Timer,
Mute, Tally, Auto- Start, Echo, Line and Remote Start, Echo, Line and Remote
gain).
6 - HOOK button for telephone hook OK button for telephone hook-up.
7 - Indicator light for incoming telephone calls. Indicator light for incoming telephone calls.
8 - Indicator light for line hook Indicator light for line hook-up.
9 - Button for assigning the channel to the PGM Button for assigning the channel to the PGM
bus.
1 0 - Button for assigning the channel to the UTL Button for assigning the channel to the UTL
bus.
1 1 - Button for enabling C Button for enabling CUE pre-listening.
1 2 - Fader.
1 3 - START button: the channel signal is sent to START button: the channel signal is sent to
the PGM and/or UTL buses selected by buttons 11 the PGM and/or UTL buses selected by buttons 11
and 12, CUE is inactivated and a pulse is sent to and 12, CUE is inactivated and a pulse is sent to
the optional remote control (if installed). the optional remote control (if installed).
1 4 - STOP button: the channel STOP button: the channel signal is not sent to
the PGM and/or UTL buses selected and a pulse is the PGM and/or UTL buses selected and a pulse is
sent to the optional remote control (if installed). sent to the optional remote control (if installed).
Operation
When the CALL Led is flashing, this means that a When the CALL Led is flashing, this means that a
telephone call is being received. telephone call is being received.
Press the HOOK button to hook up the telephone Press the HOOK button to hook up the tel
line; the respective Led lights up. To disable the line; the respective Led lights up. To disable the
telephone line, press the HOOK button again. telephone line, press the HOOK button again.
The "Meeting" function to connect two telephone The "Meeting" function to connect two telephone
users is enabled only if the respective telephone users is enabled only if the respective telephone
modules are in PGM or UTL mode. modules are in PGM or UTL mode.
The telephone modules in "St.by" mode enable the
audio functions on the PGM master module. audio functions on the PGM master module.
The director can speak privately with the telephone The director can speak privately with the telephone
users on the respective telephone modules by users on the respective telephone modules by
pressing the CUE button and Tb button so that pressing the CUE button and Tb button so that
his/her microphone can be activated. his/her microphone can be activated.
The speaker can talk privately to the telephone speaker can talk privately to the telephone
users on the respective modules if the DJ has users on the respective modules if the DJ has
pressed the CUE button on the respective module, pressed the CUE button on the respective module,
the CUE bus has been assigned to the Control the CUE bus has been assigned to the Control
Studio output, the channel has been switched over the channel has been switched over
to STOP mode and the TB button is pressed (Mike to STOP mode and the TB button is pressed (Mike
A connector); this button is connected to the A connector); this button is connected to the
microphone module
Argelato (BO) Italy
e-mail info@aev.eu
adjustment of the input
n "St.by" mode enable the
9