Telephone Module - AEV MMS 3000 Manual

Telephone module

Let's now examine the connectors and controls on the telephone input module.
AEV Broadcast Srl, via della Tecnica 33 – 40050 Argelato (BO) Italy
AEV MMMS3000 - ON AIR CONSOLE
Web site www.aev.eu
1 - Connector RJ45 for telephone line.
2 - Connector RJ45 for telephone service.
3 - Button for GAIN adjustment.
4 - Button for Frequency Filter
adjustment.
5 - Button for Filter GAIN adjustment
6 - HOOK button for telephone hook-up.
7 - Button for assigning the channel to the
PGM bus.
8 - Button for assigning the channel to the
UTL bus.
9 - Button for assigning the channel to the
AUX bus.
10 - Button for enabling CUE pre-listening.
11 - Fader.
Operation
When the CALL Led is lashing, this means
that a telephone call is being received.
Press the HOOK button to hook up the
telephone line; the respective Led lights
up.
To disable the telephone line, press the
HOOK button again.
The "Meeting" function to connect two
telephone users is enabled only if the
respective telephone modules are in PGM
or UTL mode.
To speak privately:
Set the MIC Module in STOP position, dip2
in ON position, TB in active position (MIC
connector enabled), TEL module in CUE
position.
e-mail info@aev.eu
10