D-Link DAP-1610 User Manual page 38

Section 3 - Configuration
5 GHz Extended Wi-Fi
Status: Enable or disable this 5 GHz network by toggling this slider.
Wi-Fi Name This is the name of the DAP-1610's extended network.
(SSID): If using Wi-Fi, the DAP-1610 will rebroadcast the uplink
router's Internet connection under this SSID. You may also
manually set the SSID of the extended network.
Security: Select the type of wireless security you wish to use for the
extended network. Choose None or WPA/WPA2 Personal.
Password: Enter the password or network key that you wish to use for
the extended 5 GHz network.
Wi-Fi Select Auto or any channel for use with this network.
Channel:
Channel Select Auto 20/40/80, 20 MHz, or 20/40 MHz for the
Width: bandwidth you wish this network to use.
D-Link DAP-1610 User Manual 34