Page 2
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide 1. Descriptions of front panel buttons Input card signal selection Setup button Multi-image function button DVI output selection button button...
Page 3
Win-3 or Win-4 , then press“ Win-On/Off ”to open or close corresponding window. When window open,button light up,when window closed,button light off. Window image on top ( Fade-Out) or on bottom (Fade-In) button. A6000 can open 4 windows overlay display. First select the target window by pressing Win-1、 Win-2、 Win-3 or Win-4, then press Fade-Out to set image on top,or press Fade-In to set image on bottom.
Page 4
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide Category Buttons Description Setup button. When processor under operate state ,press this button to enter setup menu, user can configure processor in the menu. Setup and Rotate knob to select menu item or adjust parameters, press knob(as OK)can save and apply parameters.
Page 5
In-A、In-B HDMI input port version is HDMI1.3,compatible with DVI and VGA input. When input VGA signal,set the dial switch to VGA side 2)Video output ports A6000 series can assemble maximum 2 output cards,each output card contains 4 independent DVI output port,each output card support 4 LED screen units splicing . 3)Communication ports LAN:Local area network TCP/IP network control port...
Page 7
S5: Output image size and position setup (Led screen mosaic) 2) Input card signal source selection(S1) 2.1) A6000 offers two kind input card: HD(2K) input card, UHD(4K) input card. Maximum 2X2k card and 2X4K card installation, marked as In-A, In-B, In-C and In-D 2.2)...
Page 8
A6000 Quick Setup Guide 5) Output image cropping by size and position(S4) 5.1) A6000 supports maximum 8 DVI outputs 5.2) Each DVI output support random input signal cropping within 3840×2160 , as shown in dotted frame in above picture S4 section 6)...
Page 9
1.3) Sending card connect to LED screen by net cable 1.4) Configure sending card and LED screen. Be noticed : The largest screen unit resolution can not exceed the output resolution of A6000 1.5) Refer to connection diagram on Picture 4-1.1 Monitor Picture 4-1.1...
Page 10
>> Note: This operation will reset A6000 to default state, all existing configuration 4.4 Color & Brightness,etc. >> data will be lost. Usually used when A6000 drives a new LED screen 4.5 Resume Data OK To Apply -------------------------------------------------------------------- otherwise, just skip this step...
Page 11
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide Step4) : Input card signal source selection 4.1) Press corresponding button to select input card signal source 4.2) Press PIP/In-A to open PIP/POP dual image display for In-A, then select sub-image source for PIP/POP 4.3)...
Page 12
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide Step6) : Multi-window size and position setup 3840 6.1) A6000 supports 4 windows display, each window’s size and position (0, 0) can be adjusted freely within resolution 3840×2160 V_Start Width 6.2) Each window’s position is defined by coordinate within 3840×2160 ,...
Page 13
6.14) Repeat the above setting from 6.7) to 6.13) to adjust more windows size and position (Win-n), save more Multi-window display mode (Mn). Step7):Input signal image cropping 3840 7.1)A6000 can assemble 2 DVI output cards, Out-A and Out-B, (0, 0) Win-1 each output card has 4 DVI/HDMI outputs.
Page 14
7.6)Press OUT-A/ DVI-n to switch the DVI outputs of OUT-A card. Press OUT-B/ DVI-n to switch the DVI outputs of OUT-B card. 7.7)Press button M0、M1、M2 、M+ to select target mode where all splicing parameters automatically saved ( A6000 can preset 13 splicing display modes)
Page 15
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide Step8): Output image size and position setup 3840 8.1) A6000 can assemble 2 DVI output cards, Out-A and Out-B, (0, 0) Win-1 each output card has 4 DVI/HDMI outputs. 8.2)Each DVI output can randomly crop image (Multi-win image)
Page 16
8.7)Press button OUT-A / DVI-n to switch the DVI outputs of OUT-A. Press button OUT-B / DVI-n to switch the DVI outputs of OUT-B. 8.8)Press button M0、M1、M2 、M+ to select target mode where all splicing parameters automatically saved. ( A6000 can preset 13 splicing display mode)
Page 17
1824×960 LED6 1728×960 Picture 4-9.1 The total LED screen resolution is 5376*2016 9.3)6 unit LED screens are connected to 6 DVI outputs of the A6000 , as the following table. OUT-A / DVI-1 LED1 OUT-A / DVI-2 LED2 OUT-A / DVI-3...
Page 18
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide 9.4) According to the above LED screen corresponding connection, "4.2 Fast Mosaic" settings of each DVI output as Picture 4-9.2, Picture 4-9.3, Picture 4-9.4, Picture 4-9.5, Picture 4-9.6 and Picture 4-9.7 4.2 Fast Mosaic Out-A/M0/DVI1 4.2 Fast Mosaic...
Page 19
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide 9.5)When finish setting from“4.2.1”to“4.2.6”,press“4.2.7” to confirm and apply,A6000 will automatically calculate the mosaic parameter. Now we can enter “4.3 Manual Mosaic” to check calculated parameters as following picture 4.3 Manual Mosaic Out-A/M0/DVI1 4.3 Manual Mosaic...
Page 20
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide 9.6)After fast mosaic. There may exist slight deviation on LED screen, then we can enter “4.3 Manual Mosaic” for fine turning, so as to offset the deviation. 9.7)Press OUT-A / DVI-n or OUT-B / DVI-n to switch different output DVI port for adjustment.
Page 21
2160 Ap1.2)In order to guarantee the display integration and proportion, we must set size and position of cropped image correctly. Win-4 Y2=1029 Ap1.3)A6000 can automatically calculate cropped image size and position by “4.2 Fast Mosaic” X1=1303 X2=1303 X3=1234 Ap1.4) If use “4.3 Manual Mosaic”,...
Page 22
SHENZHEN VDWALL CO., LTD A6000 Quick Setup Guide Ap1.5)Thus, manual mosaic parameter of each DVI output are listed as following table Out-A/DVI-1 Out-A/DVI-2 Out-A/DVI-3 Out-A/DVI-4 Out-B/DVI-1 Out-B/DVI-2 LED1 LED2 LED3 LED4 LED5 LED6 4.3.1 In Width 1303 1303 1234 1303...
Need help?
Do you have a question about the A6000 and is the answer not in the manual?
Questions and answers