Polaris EVO EPMC 0125 Operating Instructions Manual page 102

Bake
The "Bake" program is intended for baking cookies, cakes, pies, puddings, and preparing other dishes.
- Turn on the appliance. The display illumination will light up.
- Place all desired contents into the bowl according to the recipe. Follow the instructions in the "Appliance operation"
section.
- It is best to keep the lid closed while cooking with this program. If the lid is not in proper position, it might not turn
out as well.
- Select the "Bake" program from the general program list by pressing the "МЕНЮ / MENU" or the "+ and -" touch
buttons. The "Bake" display indication will start blinking.
- The ДАВЛЕНИЕ / PRESSURE mode is not available in this program.
- The default cooking time for this program is 1 hour. Set the cooking time according to the dish's recipe: press the
"ВРЕМЯ / ТЕМПЕРАТУРА / TIME / TEMPERATURE" touch button, then change time setting in 5 minute increments by
pressing the "+ and -" buttons. The time may vary in the 20 minutes to 8 hours range.
- You will not be able to adjust the temperature settings in this program. The default temperature will be 130°С. To
102
adjust the temperature, press the "ВРЕМЯ / ТЕМПЕРАТУРА / TIME / TEMPERATURE" button and use the "+ and -"
touch buttons to select the desired temperature mode: 130, 140, 150, and 160 °С.
- While operating in the no pressure mode, the time and temperature settings may be changed during cooking. Change
the parameters by pressing the "+ and -" touch buttons.
- Please bear in mind that the total cooking time, i.e. the time elapsed plus the new time setting, must not exceed the
maximum operation time determined for the program selected.
- Press the "СТАРТ / ОТМЕНА / START / CANCEL" touch button to start the program, the program will give off a sound
signal, and the multicooker will begin operating according to the program selected. The "Выпечка / Bake" sign on
the display and the "СТАРТ / ОТМЕНА / START / CANCEL" touch button indicator will remain on. Display starts show
countdown of the program.
- After the program is complete, the appliance will switch to the ПОДОГРЕВ / KEEP WARM mode. To disable automatic
switching to the ПОДОГРЕВ / KEEP WARM mode, press the "ДАВЛЕНИЕ / ОТМЕНА ПОДОГРЕВА / PRESSURE /
CANCEL KEEP WARM" touch button, a signal will sound, and the "ПОДОГРЕВ / KEEP WARM" indicator on the display
will go out. You can activate automatic switching into the ПОДОГРЕВ / KEEP WARM mode again later by pressing the