GPX CR2307 User Manual page 5

Setup and Clock
Power
Plug the AC power cable into an AC power
outlet to power the clock radio.
Included
Requires 1 9 volt battery (not included)
The backup battery is meant for short
unexpected losses of power. The clock radio
cannot fully function off of the backup
battery alone.
Customer Support: 1-888-999-4215
Setting the Clock
Press and hold the TIME button.
1.
While holding the TIME button, press
2.
the HOUR button to adjust the hour
and the MINUTE button to adjust the
minute.
The PM indicator on the LED Display will
tell you if the time is set to PM. If there
is no PM indicator then the time is set to
AM.
Setting the Alarm
Press and hold the ALARM button.
1.
While holding the ALARM button,
2.
press the HOUR button to adjust the
hour and the MINUTE button to adjust
the minute.
3. To wake to the buzzer, turn the volume
dial counter-clockwise to Buzzer until it
clicks into place. To wake to the radio
turn the volume to the desired level.
Adjust the OFF/ON/AL switch to AL to
4.
activate the alarm.
Setting the Sleep Timer
Switch the OFF/ON/AL Toggle Switch
1.
to the OFF or AL position.
2. Press and hold the SLEEP button.
While holding the SLEEP button, press
3.
the HOUR button to increase the
hour and press the MINUTE button to
decrease the minute. The sleep timer
cannot be set for longer than 1 hour 59
minutes.
4. After the set amount of time has
expired the Radio will shut off.
5