CI189B Clock Radio with Dock for iPod ® T a B l e o f C o n T e n T s Warnings and Precautions ...2 Important safety Instructions ...3 In the Box & features ...4 Powering the Unit & Battery Backup ...5 Docking an iPod &...
Warnings and Precautions This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, fUllY InseRT.
Important safety Instructions Read Instructions - all the safety and operating instruction should be read before the product is operated. Retain Instructions - The safety and operating instruction should be retained for future reference. Heed Warnings - all warning on the product and in the operating instructions should be adhered to.
• Recharge Circuit for iPod/mini/nano/photo/video • Includes Brackets to fit iPod players • Controls connected iPod players Stereo Line-In Jack, 3.5mm type AM/FM Clock Radio • Analog AM/FM Radio with Direct Tuning • Rotary Volume Control • Gradual Wake Alarm •...
Powering the Unit To power the unit, plug the attached AC cord into a standard AC outlet (120V~60Hz) Battery Backup Install a 9-Volt Battery into the Battery Compartment on the bottom of the unit to serve as a battery backup. This is meant only to keep the time and alarm settings in the case of unexpected power failure.
Docking an iPod Step 1: locate the numbered bracket that matches the iPod to be docked. • Each included bracket has a number on it indicating which iPod model that bracket is compatible with. Use the bracket chart (separate from the manual) to identify which bracket is needed. Step 2: snap the bracket into place over the dock for iPod.
setting the Clock Step 1: Press and hold the Step 2: While holding the the hour, and the Minute Button to adjust the minute. • The PM Indicator at the top left of the LED Display will illuminate when the time is set to PM. Step 3: Release the setting the alarm...
Page 9
Control Definitions Skip/Search Buttons Press the Skip/Search Buttons to skip from one track to the next on a docked iPod. Press and hold the Skip/Search Buttons to search through an individual track on a docked iPod. Alarm Set/Alarm Off Button Press and hold the alarm set Button to set the alarm.
Page 11
Control Definitions PM Indicator The PM Indicator is lit when the time is set to pm, and not lit when the time is in the am. Alarm Indicator The alarm Indicator is lit when the alarm is set and turned on. Alarm Source Switch Use the alarm source switch to set which function the alarm will sound to.
Para descargar este manual de instrucción en inglés, español, o francés visite la sección de la ayuda en www.gpx.com. Pour télécharger ce manuel d’instruction en anglais, espagnol, ou le Français visitez la section de soutien à www.gpx.com.