Table of Contents
Advertisement
216 Driving and parking
If the windshield in the area of the multifunc‐
R
tion camera is dirty, or if the camera is fog‐
ged up, damaged or covered.
If the traffic signs are hard to detect, e.g. due
R
to dirt or snow, or because they are covered
or due to insufficient lighting.
If the information in the navigation system's
R
digital map is incorrect or out-of-date.
If the signs are ambiguous, e.g. traffic signs
R
on construction sites or in adjacent lanes.
If you turn sharply, when passing traffic signs
R
outside the camera's field of vision.
Setting Traffic Sign Assist
Requirements:
For automatic adoption of speed limits:
R
Active Distance Assist DISTRONIC is activa‐
ted.
Multimedia system:
Vehicle
k Assistance
4
5
Traffic Sign Assist
5
Activating/deactivating automatic adoption
of speed limits
Select
Limit
Adoption.
#
Activate O or deactivate ª the function.
#
The speed limits detected by Traffic Sign
Assist are automatically adopted by Active
Distance Assist DISTRONIC.
Displaying detected traffic signs in the
media display
Select
Display in
COMAND.
#
Activate O or deactivate ª the function.
#
%
If one of the following systems is activated,
the speed detected can be manually adopted
as the speed limit:
Active Distance Assist DISTRONIC
R
Cruise control
R
Further information (
page 181).
/
Adjusting the type of warning
Select
Visual &
Audible,
Visual
or None.
#
Adjusting the warning threshold
This value determines the speed at which a
warning is issued when exceeded.
Select
Warning
Threshold.
#
Set the desired speed.
#
Advertisement
Table of Contents
