Table of Contents
Advertisement
Folding the outside mirrors in/out
Briefly press switch 1.
#
Resetting the outside mirrors
%
If the battery has been disconnected or com‐
pletely discharged, the outside mirrors must
be reset. Only then will the automatic mirror
folding function work properly.
Briefly press switch 1.
#
Adjusting the outside mirrors
Select the required mirror using button
#
4.
Use button
2
to set the position of the mir‐
#
ror you have selected.
Engaging the outside mirrors
Press and hold button 1.
#
You will hear a click and the mirror will audi‐
bly engage in position. The mirror is set in
the correct position.
Automatic anti-glare mirrors function
& WARNING Risk of acid burns and poi‐
soning due to the anti-glare mirror elec‐
trolyte
Electrolyte may escape if the glass in an
automatic anti-glare mirror breaks.
The electrolyte is hazardous to health and
causes irritation. It must not come into con‐
tact with your skin, eyes, respiratory organs
or clothing or be swallowed.
Light and visibility 129
If you come into contact with electro‐
#
3
or
lyte, observe the following:
Immediately rinse the electrolyte
R
from your skin with water and seek
medical attention.
If electrolyte comes into contact
R
with your eyes, immediately rinse
them thoroughly with clean water
and seek medical attention.
If the electrolyte is swallowed,
R
immediately rinse your mouth out
thoroughly. Do not induce vomiting.
Seek medical attention immediately.
Immediately change out of clothing
R
which has been contaminated with
electrolyte.
If an allergic reaction occurs, seek
R
medical attention immediately.
The inside rearview mirror and the outside mir‐
ror on the driver's side will automatically go into
anti-glare mode if light from a headlamp hits the
sensor on the inside rearview mirror.
Advertisement
Table of Contents
