Table of Contents
Advertisement
Moving the wiper arms to the replacement
position
If the ignition has been switched off, switch it
#
on first of all.
Switch the ignition off.
#
Within around 15 seconds, press and hold
#
the î button for approximately 3 sec‐
onds(
page 126).
/
The wiper arms will move into the replace‐
ment position.
Removing the wiper blades
To bring the wiper blade into position to
#
be removed: hold the wiper arm firmly in
one hand. With the other hand, turn the
wiper blade in the direction of arrow
beyond the point of resistance.
The wiper blade will engage in the removal
position with a click.
To remove the wiper blade: press release
#
button 2, pull the wiper blade in the direc‐
tion of arrow
3
and remove.
Installing the wiper blades
1
Push the new wiper blade onto the wiper arm
#
in the direction of arrow
ton
2
engages.
Light and visibility 127
1
until release but‐
Advertisement
Table of Contents
