Transferring Music - Sony WALKMAN NW-A1000 Series Quick Start Manual

Transferring Music

Connect the player to your computer and transfer the audio data to the player.
USB cable
(supplied)
You can charge the player's battery by connecting the player to your computer with the
supplied USB cable.
For details on charging times, refer to the Operation Guide (PDF file).
14
How to remove the USB
cable
 press and hold the buttons on
both sides, and then  pull the
USB cable outward.
Do not force the cable from the
player. Doing so may damage
the player.
1
Double-click the icon on the desktop.
SonicStage starts up.
2
Connect the USB connector of the player to your computer.
A dialogue box that asks you to confirm whether or not to use Intelligent Features
appears.
3
Click "OK" to activate the Intelligent Features.
"Are you sure you want to start automatic transfer?" appears.
4
Click "Yes."
Songs or albums which have not yet been transferred are transferred to the player
automatically.
Notes
• Before transferring tracks or using the player for the first time, fully charge the battery.
• Do not disconnect the player from your computer while data is being transferred.
• If the computer enters a power saving mode such as system suspend, sleep, or hibernation
while the player is connected, the player's battery will begin discharging.
• Do not leave the player connected for extended periods to a laptop computer that is not
connected to AC power, because the player may discharge the computer's battery.
 Hints
• SonicStage also offers the following additional features. For details, refer to SonicStage Help.
– Transferring only selected audio files.
– Creating and transferring playlists that group your favorite songs into a list.
• Replace the USB cap after disconnecting the player from your computer.
15