Page 1
Wireless Kinetic HOME SERIES Door Chime INSTRUCTION MANUAL...
Page 2
Feature Description - Speaker Unit 1. Indicator LED - The LED will flash when the doorbell is pressed. It will continue flashing for the duration of the chime selected. 2. Chime Selection - Press this to select a different chime. 2.
Page 3
Feature Description - Doorbell Unit Mounting Instructions There are two ways that you can permanently mount the doorbell unit - 1. Mounting Plate & Screws - Find a place that you want to mount the doorbell unit to. Flat, smooth surfaces are ideal. It’s recommended to do a short test before doing a permanent installation.
Page 4
Operating Guide Mount the doorbell unit near a point of entrance. Avoid areas that may get wet as the doorbell unit is not waterproof. Avoid mounting onto metal surfaces or UPVC door frames. Plug the speaker unit into a spare power socket and turn the power on. The LED will flash and a chime will play.
Page 5
Troubleshooting The speaker unit is not playing a chime when the doorbell is pressed. • Make sure the speaker unit is plugged in and turned on • Make sure the speaker unit is within the specified range • Make sure the speaker unit is not in silent mode The speaker unit is working intermittently when the doorbell is pressed.
Page 6
FCC Verification This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential in- stallation.
Page 7
Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.
Need help?
Do you have a question about the HOME Series and is the answer not in the manual?
Questions and answers