Advertisement
Clear Offsets and Change to Machine Coordinates
Figure 16
Clear Offsets
1. After homing completes, click Jog in the top menu bar.
2. Click the Set Zero button. See Figure 16.
3. On the Set Current Position screen, click the Clear All Offsets button. Then, click DONE. See Figure 17.
4. Click the Position label. This will toggle the view to the machine coordinates. See Figure 18.
Figure 18
5. Click Rapid Position, then click the SE button to move the
spindle to the front-right of the machine. Once in position, click
DONE. See Figure 18.
6.
From the JOG screen, use the arrows on the screen (or the
arrows on your keyboard) to jog the gantry so the spindle is
directly above the BitSetter (as shown in Figure 19).
support@carbide3d.com
Figure 17
docs.carbide3d.com
Figure 19
12/2/19 v1.0
9
Advertisement
