Advertisement
WARNING! Before servicing or cleaning unit,
switch off power at service panel and lock the
service disconnecting means to prevent power
from being switched on accidentally.
WARNING! When the service disconnecting
means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the
service panel.
OUTSIDE
1.
Using a soft cloth or sponge and mild soap or
detergent, gently wash cover (including air inlet
holes) with lukewarm water to loosen dirt and grime.
INSIDE
CAUTION! Shut off power to hand dryer at
service connection. Cleaning should be
performed by qualified service personnel.
NOTE: With normal use, hand dryer will require
cleaning once a year. Heavier usage requires
more frequent cleaning. Lint on air inlet or other
internal parts of hand dryer will reduce efficiency
and shorten life of the working parts.
WATER TANK
1.
When water tank is full a red light will turn on.
(See Figure 10)
PAGE 5 OF 7
MAINTENANCE
2. Pull tab in slightly and pull tank down. Empty and
clean water tank. (See Figure 11)
3. Once emptied and clean, put tank back in hand
dryer. Once tank is empty, red light will turn off.
Red Light
Figure 10
Water Tank
Figure 11
0219 IH-7862
Advertisement
