Download Print this page

Philips ClearScape LED Series Installation Instructions page 4

Advertisement

INSTALLATION INSTRUCTIONS
ClearScape LED
CSFS Small and CSFM Medium
YK - Yoke Mount
- (Cont'd)
Floodlight
OK to mount
floodlight "down"
on yoke mount.
Opening Glass Door Frame
Note: Procedure to open glass door frame
is the same on slip fitter and yoke mount
fixtures.
STEP 1:
Loosen two captive screws on either side
of top rear floodlight cast housing.
STEP 2:
Rotate glass door frame down to fully
open position as shown here.
STEP 3:
After servicing luminaire, carefully rotate
glass door frame up into closed position
and retighten screws loosened in Step 1.
© 2016 Philips Lighting Holding B.V. All rights reserved.
www.philips.com/luminaires
Part Number 443561208870 Rev. C
Page 4 of 4
Align aiming mark
with correct
degree marks on
bracket
Note: Dimensions not to scale. For dimensional purposes only.
Philips Lighting North America
Corporation
200 Franklin Square Drive,
Somerset, NJ 08873, USA
Philips Lighting Canada Ltd.
281 Hillmount Road,
Markham ON, Canada L6C 2S3

Advertisement

loading

This manual is also suitable for:

Clearscape led csfs smallClearscape led csfm medium