3 Connect
Make the following basic connections to use the
DVD player.
Basic connections:
•
Video cables
•
Audio cables
Optional connections:
•
Audio to other devices:
•
Multi channel receiver
•
Digital ampliÀ er/receiver
•
Analog stereo system
Note
•
Refer to the type plate at the rear or bottom of the
product for identiÀ cation and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
available at www.connectivityguide.philips.com.
Connect video cables
Connect this DVD player to the TV to view
disc play.
Select the best video connection that the TV can
support.
•
Option 1:
Connect to HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
•
Option 2:
Connect to component video
jacks (for a standard TV or Progressive Scan
TV).
•
Option 3:
Connect to video (CVBS) jack
(for a standard TV).
Note
DVD player
•
You must connect this
TV.
Option 1: Connect to HDMI jack
HDMI OUT
1
Connect a HDMI cable (not supplied) to
the HDMI OUT jack on this DVD player
and the HDMI input jack on the TV.
•
Use a HDMI-DVI adaptor in case the
TV has only a DVI connection.
Note
•
If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see
chapter 'Use Philips EasyLink').
Tip
•
This type of connections provide best picture quality.
directly to a
HDMI IN
EN
9