Work Mode - Geco GA03HA-01 User Manual

GA03HA-01 User Manual
The same applies to changes of hot water temperature:
Change temperature values by using the buttons
pressing the key

6.4.3. Work mode

Here, the user can choose automatic or manual work modes. The symbol „V" indicates the chosen work
mode.
If you want to change the work mode, use the keys
highlighted. The selected mode will appear on the screen after pressing the button
mode was automatic and you would like to select manual mode, the screen displays the questions:
Accept using the button
next to work mode. If you do not want to accept the change, use the button
setting and return to the previous menu.
The same procedure applies to changing from manual mode to automatic mode
⇒
A description of changes to work mode is available in point 6.2.2 in the
Page 19
, or return to a higher level menu without saving, by pressing the button
. This will change the mode to manual, and the symbol „V" is displayed
description of „fast access keys".
Edition I
or . Accept the new temperature value by
or and the selected work mode will be
PPUH „GECO" Sp. z o.o.
.
. If the previous
to return to the previous
Valid from 2017-07-26