Table of Contents
Advertisement
GA03HA-01 User Manual
PPUH „GECO" Sp. z o.o.
Connection
Boiler extinguished
detection
Work mode:
Summer/winter
On/off
Anti-Legionella
Feeder overheating
emergency work
Description of chosen
Press the button
to return to the previous screen.
Exit to the main screen by pressing the button
.
6.2.2. Change work mode
Use this button
to change the controller work mode. Access to work mode changes is also possible
via the menu (1.3).
If the controller was already in automatic mode, it goes to manual mode. This is indicated by displaying a
constant temperature on the main screen. The programme number disappears and the hourly heating cycle is
not distinguished (the bar at the bottom of the screen indicates the heating cycle).
If the controller is already in manual mode, it enters automatic mode. This is indicated by displaying two
temperatures: "day" and "night". Hourly heating cycles (on the bar at the bottom of the screen) and
programme number are indicated.
Daytime mode is
Night time mode
set
is set
It is possible to edit selected temperatures in both automatic and manual modes, using the buttons
and
. Changes do not need to be confirmed.
Page 12
Edition I
Valid from 2017-07-26
Advertisement
Table of Contents
