YOKO EP3000Y User Manual
  1. Manuals
  2. Brands
  3. YOKO Manuals
  4. Barcode Reader
  5. EP3000Y
  6. User manual

YOKO EP3000Y User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User Guide
V1.0.5
第 1 页 共 70 页

Advertisement

Table of Contents
loading

Related Manuals for YOKO EP3000Y

Summary of Contents for YOKO EP3000Y

  • Page 1 User Guide V1.0.5 第 1 页 共 70 页...
  • Page 2 About This User Guide Pls read all the content of the user guide carefully to use the products safely and effectively. You are advised of keeping it properly for your using reference for the next query. Disclaimer Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide warranty or replacement service.
  • Page 3 Version record Manual Version number Version description publication date SV1.0 ZS_27 1.1_QRY_P1_20190925_20190 Initial version 2019-9-17 827e021_190827 第 3 页 共 70 页...

  • Page 4: Table Of Contents

    Catalog 1.Product Introduction ........................10 1.1 Main feature ........................... 10 1.2 Unpack your device ......................10 1.3 Communication port ......................10 1.4 Start-up, shutdown, standby and restart ................11 1.5 Maintenance ........................... 11 1.6 Reading skills .......................... 11 2. Barcode setting ..........................12 2.1 Mark Setting ...........................
  • Page 5 2.2.10 Control character escape ................... 18 2.2.11 GS Control character escape(need to turn on the control character escape function) ............................18 2.2.12 Prefix setting ........................18 2.2.13 Suffix setting ........................19 2.2.14 Unicode Output Mode ....................19 2.2.15 Inverse Code Option ...................... 20 2.2.16 Virtual keyboard ......................
  • Page 6 2.8 Keyboard layout setting ......................25 2.9 Symbologies ..........................28 2.9.1 enable/disable all symbologies ..................28 2.9.2 Codabar ..........................28 2.9.3 Codabar start/ending character setting ............... 28 2.9.4 Codabar limitation of length ..................29 2.9.5 Code 39 ..........................29 2.9.6 Code 39 check bit ......................29 2.9.7 Code 39 Full ASCII ......................
  • Page 7 2.9.21 Code 93 ..........................34 2.9.22 Code 93 Limitation of length ..................34 2.9.23 Code 11（Not Enabled） ....................35 2.9.24 Code 11 check bit output（Not Enabled） ..............35 2.9.25 Code 11 check bit option（Not Enabled） ..............35 2.9.26 Code 11 Limitation of length（Not Enabled） ............35 2.9.27 Code 128 ..........................
  • Page 8 2.9.43 UPC-E expand UPC-A ....................40 2.9.44 EAN/JAN-8 ........................40 2.9.45 EAN/JAN-13 ........................40 2.9.46 UPC/EAN/JAN extra-code .................... 40 2.9.47 EAN13 to ISBN ......................... 41 2.9.48 EAN13 to ISSN ......................... 41 2.9.49 GS1 DataBar（RSS14）(Stacked) .................. 41 2.9.50 GS1 DataBar（RSS14）(Stacked) AI（01）character send ........41 2.9.51 GS1 DataBar Limited ......................
  • Page 9 Appendix 1 Data and edit barcode ..................47 Appendix 2 Barcode type ID table ..................49 Appendix 3 Invisible character ASCII table ................53 Appendix 4 Visible character ASCII table ................55 Appendix 5 Default setting table ..................... 57 Appendix 6 Operational character (USB keyboard) ............65 Appendix 7 Operational character (serial port and USB-VCOM) ........

  • Page 10: Product Introduction

    1D&2D barcodes by 2D image scanning pattern, and apply the complete set of patent technology developed by Guangzhou YOKO Electron Co., Ltd. The scanners above are of strong identification capability, and support automatic continuous scanning mode with fast and flexible scanning speed.

  • Page 11: Start-Up, Shutdown, Standby And Restart

    1.4 Start-up, shutdown, standby and restart Start-up：Connect host computer with scanner, which will automatically start-up and in working state. Shutdown：Remove the data cable which is connected with scanner; remove the USB which is connected with host computer; remove the power adapter which is inserted into RS-232 serial port.Restart：If the scanner crashes or doesn't respond, please switch it off and restart.

  • Page 12: Barcode Setting

    2. Barcode setting This model of laser desktop barcode scanner is designed to change settings by reading some special barcode, which we will give you a detailed introduction and show you all the barcodes for the corresponding setting in this section. The greatest advantage of this setting method is direct, intelligible and user friendly.

  • Page 13: Restore Factory Default

    2.2.2 Restore factory default Restore Factory Default 2.2.3 Read version number Version Number 2.2.4 Product user configuration Scan the barcode below to save the current parameters of the product as a user configuration. Save User Configuration Scan the barcode below restores the product to a saved user configuration. Restore User Configuration 2.2.5 Upper PC and Notepad upload settings Upper PC Upload...

  • Page 14: Interface Mode Setting

    2.2.6 Interface mode setting The scanning platform supports the interface mode of USB keyboard, USB to serial port and serial port. Scan the barcode below to configure it as a USB PC keyboard and USB MAC keyboard mode. USB Keyboard USB MAC Keyboard (Disable) Host Mode (Command Decoding +...

  • Page 15: Wigan Interface Setting-- Wigan Protocol Format

    Device ID Settings USB Upgrade 2.2.7 Wigan interface setting-- Wigan protocol format 26 bit 34 bit 2.2.8 Serial port setting 2.2.8.1 Serial port baud rate setting Baud Rate 4800 Baud Rate 9600 (Default ) Baud Rate 38400 Baud Rate 19200 第...

  • Page 16: Serial Data Bit, Stop Bit, Check Bit Setting

    Baud Rate 57600 Baud Rate 115200 2.2.8.2 Serial data bit, stop bit, check bit setting 7-bit data, 1-bit stop, no parity 7-bit data, 1-bit stop,even parity 7-bit data, 1-bit stop,odd parity 7-bit data, 2-bit stop, no parity 7-bit data, 2-bit stop,even parity 7-bit data, 2-bit stop,odd parity 第...

  • Page 17: Lighting Control

    8-bit data, 1-bit stop, no parity (Default) 8-bit data, 1-bit stop,even parity 8-bit data, 1-bit stop,odd parity 8-bit data, 2-bit stop,no parity 8-bit data, 2-bit stop,even parity 8-bit data, 2-bit stop,odd parity 2.2.9 Lighting control Normal Mode (Default) Lighting Always Off Lighting Often Turn On 第...

  • Page 18: Control Character Escape

    2.2.10 Control character escape Turn On Control Character Escape Turn Off Control Character Escape (Default) 2.2.11 GS Control character escape(need to turn on the control character escape function) Not Replace The output character "Ç" must Enable virtual keyboard first （mode1）”or（mode2）or（mode3） Replace With Ç...

  • Page 19: Suffix Setting

    Cancel prefix (Default) <STX> <Data> 2.2.13 Suffix setting Cancel Suffix <Data> <CR (Carriage Return)> <Data> <LF> <Data> <CR> <LF> (Default) <Data> <\t> <Data> <ETX> 2.2.14 Unicode Output Mode In order to correctly output according to the specified encoding format, the output encoding format needs to be specified,for example, simplified Chinese is configured as GBK encoding in notepad /excel output, and UNICODE encoding in Word output.

  • Page 20: Inverse Code Option

    keyboard is forced to be virtual keyboard output. English Output （ Default ） Unicode Output (Notepad/ Excel) UNICODE Coding (Word ) 2.2.15 Inverse Code Option （Only 1D/DataMatrix/Aztec） Only Decode Normal Code Only Decode Inverse Code Decode Both Normal Code And Inverse Code(Default) 式...

  • Page 21: Buzzer , Led Indicator Barcode And Vibration Prompt Setting Barcode

    Disable Virtual Keyboard (Default ) Enable Virtual Keyboard（Mode 1） Enable Virtual Keyboard（Mode 2） Enable Virtual Keyboard（Mode 3） 2.3 Buzzer , LED indicator barcode and vibration prompt setting barcode 2.3.1 Beeper Volume setting Low Volume High Volume (Default) 2.3.2 Start-up beep Shut Down Start-Up Beep Open Start-Up Beep (Default ) 2.3.3 Good read beep...

  • Page 22: Beep Pitch-Good Read

    Good Read Beep Off（ Default） 2.3.4 Beep pitch-good read Low Pitch (Default ） Middle Pitch High Pitch 2.3.5 Beep duration-good read Tone Long (Default ) Tone Pip 2.3.6 Error sound You will hear 4 continue alarm sounds when data upload failure, one single alarm sound means scan indistinguishableness barcode.

  • Page 23: Good-Read Led

    Error Sound High Pitch 2.3.7 Good-read LED Good-Read LED Off Good-Read LED On（ Default） 2.4 Timeout between decodes (Same barcodes)（Self-induction mode） 2.4.1 Timeout between same decode Used to configure the interval time for solving the same barcode. If the setting time is not exceeded, the same barcode will be solved only once.

  • Page 24: Reading Time

    2.4.2 Reading time Single Reading Time In the inductive reading mode, this parameter refers to the maximum length of time that the reading engine is allowed to continue to collect and recognize before the reading is successful. After a successful reading or a single reading timeout, the reading engine will enter an interval that does not capture the reading.

  • Page 25: Oa & Lf Setting（Usb Keyboard

    2.6 OA & LF Setting（USB keyboard） Only 0A(LF) Line Feed Only 0D(CR) Line Feed (Default) Both 0A(LR) And 0D(CR) Line Feed 2.7 USB keyboard text-transform Normal Output (Default) Case Reversal All Caps All Lowercase 2.8 Keyboard layout setting English (United States) 第...
  • Page 26 French (France) Italian (Italy) Italian 142 (Italy)（Disable） German (Germany) Spanish (Spain) Spanish (Latin America)（Disable） Finnish（Disable） Japanese（Disable） Russian (MS)（Disable） Russian (typewriter)（Disable） 第 26 页 共 70 页...
  • Page 27 Arabic (101)（Disable） Irish（Disable） Polish (214)（Disable） Polish (Programmers)（Disable） Dutch (Netherlands)（Disable） Czech (QWERTZ)（Disable） Portuguese (Portugal) Portuguese (Brazil) Swedish (Sweden）（Disable） Turkish Q Turkish F（Disable） 第 27 页 共 70 页...

  • Page 28: Symbologies

    Greek (MS)（Disable） French (Belgium) English (UK)（Disable） 2.9 Symbologies 2.9.1 enable/disable all symbologies Enable all barcode might slow down scanner decode speed. We suggest enable the barcode you need based on your scene. Enable all barcode is default . Enable All Symbologies (Default) Disable All Symbologies 2.9.2 Codabar Enable Codabar...

  • Page 29: Codabar Limitation Of Length

    Send Codabar Start/Ending Character 2.9.4 Codabar limitation of length Codabar Min Length（1~127 bit） Codabar Max Length（1~127 Bit） 2.9.5 Code 39 Enable Code 39 Disable Code 39 2.9.6 Code 39 check bit Disable Code 39 Check Bit (Default) Enable Code 39 Check Don’t Send Check Bit Enable Code 39 Check Send Check Bit 第...

  • Page 30: Code 39 Full Ascii

    2.9.7 Code 39 Full ASCII Enable Full ASCII Disable Full ASCII (Default) 2.9.8 Code 39 limitation of length Code 39 Max Length (1~127 Bit) Code 39 Min Length (1~127 Bit) 2.9.9 Code 32 (Code 39 needs to be enabled）（Not Enabled） Enable Code 32 Disable Code 32 2.9.10 Interleaved 2 of 5 （ITF5）...

  • Page 31: Interleaved 2 Of 5 （Itf5）Length Setting

    Disable ITF25 Check (Default) Enable ITF25 Check Don’t Send Check Bit Enable ITF25 Check Send Check Bit 2.9.12 Interleaved 2 of 5 （ITF5）length setting ITF25 No Fixed Length (4-128 bit)（Default） ITF25 6 bit Length ITF25 8 bit Length ITF25 10 bit Length ITF25 12 bit Length ITF25 14 bit Length 第...

  • Page 32: Interleaved 2 Of 5 Limitation Of Length

    ITF25 16 bit Length ITF25 18 bit Length ITF25 20 bit Length ITF25 22 bit Length ITF25 24bit Length 2.9.13 Interleaved 2 of 5 Limitation of length Interleaved 2 of 5 Min Limitation Length （4~128 Bit） Interleaved 2 of 5 Max Limitation Length (4~128 Bit) 2.9.14 Industrial 2 of 5 (Industrial 25code)（4-24bit）...

  • Page 33: Industrial 2 Of 5 Limitation Of Length

    2.9.15 Industrial 2 of 5 Limitation of length Industrial 2 of 5 Min Length (4~128 bit) Industrial 2 of 5 Max Length (4~128 bit) 2.9.16 Matrix 2 of 5 (matrix 25 code)（4-24 bit） Enable Matrix 2 of 5 Disable Matrix 2 of 5 2.9.17 Matrix 2 of 5 Limitation of length Matrix 2 of 5 Min Length (4~128 bit) Matrix 2 of 5 Max Length (4~128 bit)

  • Page 34: Standard 25Limitation Of Length

    2.9.19 Standard 25Limitation of length Standard 25 Min Length（4~128 bit） Standard 25 Max Length （4~128 Bit） 2.9.20 Standard 25 check bit setting Standard 25 Don’t Check (Default) Standard 25 Check Not Output Standard 25 Check And Output 2.9.21 Code 93 Enable Code 93 Disable Code 93 2.9.22 Code 93 Limitation of length...

  • Page 35: Code 11（Not Enabled

    2.9.23 Code 11（Not Enabled） Enable Code 11 Disable Code 11 (Default) 2.9.24 Code 11 check bit output（Not Enabled） Enable Code 11Check Bit Output Disable Code 11 Check Bit Output 2.9.25 Code 11 check bit option（Not Enabled） Disable Code 11 Check Bit (Default) Code 11 One Check Bit Code 11 Two Check Bit 2.9.26 Code 11 Limitation of...

  • Page 36: Code 128

    2.9.27 Code 128 Enable Code 128 Disable Code 128 2.9.28 Code 128 Limitation of length Code 128 Min Length (1~127 bit) Code 128 Max Length (1~127 bit) 2.9.29 GS1-128(requires CODE 128 to be enable） Enable GS1-128 Disable GS1-128 2.9.30 ISBT-128 Disable ISBT 128 2.9.31 Plessey Enable ISBT 128...

  • Page 37: Plessey Limitation Of Length

    Disable Plessey 2.9.32 Plessey Limitation of length Plessey Min Length（1~127 bit） Plessey Max Length （1~127 bit） 2.9.33 Plessey check bit optional Plessey Don’t Check Plessey Check Anf Send Check Bit Plessey Check Don’t Send Check Bit (Default) 2.9.34 MSI plessey Enable MSI Plessey (Default) Disable MSI Plessey 第...

  • Page 38: Msi Plessey Limitation Of Length

    2.9.35 MSI plessey Limitation of length MSI Plessey Min Length （1~127 bit） MSI Plessey Max Length （1~127 bit） 2.9.36 MSI plessey check bit output MSI Plessey Check Bit Output MSI Plessey Check Bit Don’t Output (Default) 2.9.37 MSI plessey Check mode selection setting MSI Plessey Don’t Check MSI Plessey One Check Bit MOD10 (Default) MSI Plessey Two Check Bit MOD10/MOD10...

  • Page 39: Upc-A

    2.9.38 UPC-A Enable UPC-A Disable UPC-A 2.9.39 UPC-A check bit Send UPC-A Check Bit (Default) Don’t Send UPC-A Check Bit 2.9.40 UPC-A to EAN-13 Enable UPC-A To EAN-13 Disable UPC-A To EAN-13 (Default) 2.9.41 UPC-E Enable UPC-E Disable UPC-E 第 39 页 共 70 页...

  • Page 40: Upc-E Check Bit

    2.9.42 UPC-E Check Bit Send UPC-E Check Bit (Default) Don’t Send UPC-E Check Bit 2.9.43 UPC-E Expand UPC-A Enable UPC-E Expand UPC-A Disable UPC-E Expand UPC-A (Default) 2.9.44 EAN/JAN-8 Enable EAN/JAN-8 Disable EAN/JAN-8 2.9.45 EAN/JAN-13 Enable EAN/JAN-13 Disable EAN/JAN-13 2.9.46 UPC/EAN/JAN extra-code Ignore UPC/EAN/JAN Extra-Code (Default) 第...

  • Page 41: Ean13 To Isbn

    Decode UPC/EAN/JAN Extra-Code Adapt UPC/EAN/JAN Extra-Code 2.9.47 EAN13 to ISBN Enable EAN13 To ISBN Disable EAN13 To ISBN (Default) 2.9.48 EAN13 to ISSN Enable EAN13 To ISSN Disable EAN13 To ISSN (Default) 2.9.49 GS1 DataBar（RSS14）(Stacked) Enable GS1 DataBar Disable GS1 DataBar 2.9.50 GS1 DataBar（RSS14）(Stacked) AI（01）character send Send AI（01）Character (Default) 第...

  • Page 42: Gs1 Databar Limited

    Don’t Send AI（01）Character 2.9.51 GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Limited 2.9.52 GS1 DataBar Limited AI（01）character send Send AI（01）Character (Default) Don’t Send AI（01）Character 2.9.53 GS1 DataBar Expanded Enable GS1 DataBar Expanded Disable GS1 DataBar Expanded 2.9.54 PDF417 Enable PDF417 第...

  • Page 43: Micro Pdf417

    Disable PDF417 2.9.55 Micro PDF417 Enable Micro PDF417 Disable Micro PDF417 2.9.56 QR Code Enable QR Disable QR 2.9.57 Micro QR Enable Micro QR Disnable Micro QR 2.9.58 Data Matrix Enable Data Matrix Disable Data Matrix 第 43 页 共 70 页...

  • Page 44: User-Defined Prefix Setting

    2.10 User-defined prefix setting Output Enable User-Defined Prefix Output Disable User-Defined Prefix Output (Default) Edit Clear All User-Defined Prefix User-Defined Prefix (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) 2.11 User-defined suffix setting Output options Disable User-Defined Suffix Output Disable User-Defined Suffix Output (Default)

  • Page 45: Barcode Prefix&Suffix Order Selection

    (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) 2.12 Barcode prefix&suffix order selection Prefix <Prefix><CODE ID><AIM ID><User-Defined Prefix>(Default) <Prefix><User-Defined Prefix><CODE ID><AIM ID> Suffix <User-Defined Suffix><CODE ID><AIM ID><Suffix> (Default) <CODE ID><AIM ID><User-Defined Suffix><Suffix> 2.13 Code ID setting Output options Disable CODE ID (Default)

  • Page 46: Aim Id Setting

    (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) Clear All User-Defined CODE ID 2.14 AIM ID Setting Disable Barcode AIM ID (Default) Enable Former Barcode AIM ID Enable Latter Barcode AIM ID 第...

  • Page 47: Appendix

    Appendix Appendix 1 Data and edit barcode 第 47 页 共 70 页...
  • Page 48 Cancel A String Of Data Read Before Cancel Current Setting Save Cancel A String Of Data Read Before 第 48 页 共 70 页...

  • Page 49: Appendix 2 Barcode Type Id Table

    Appendix 2 Barcode type ID table Barcode type CODE ID(default) All code system Codabar Code128 ISBT-128 Code32 < Code93 Code39 Code11 Plessey MSI plessey EAN-13 EAN-8 GS1 DataBar（RSS14） (Stacked) GS1 DataBar Limited GS1 DataBar Expanded GS1-128 (EAN-128) 2 of 5 Interleaved 2 of 5 第...
  • Page 50 Matrix 2 of 5 Industry 2 of 5 Stamdard 25 UPC-A UPC-E ISBN ISSN DataMatrix PDF417 Micro PDF417 QR Code Micro QR Code 第 50 页 共 70 页...
  • Page 51 Barcode type AIM ID Description All code system Codabar m：0~1 Code128 m：0，1，2，4 ISBT-128 Code32 Code93 Code39 m：0，1，3，4，5，7 Code11 m：0，1，3，8，9 Plessey MSI plessey m：0，1，7，8，9 EAN-13 m：0，1，3，4 EAN-8 m：0，1，3，4 GS1 DataBar(RSS14） (Stacked) GS1 DataBar Limited GS1 DataBar Expanded GS1-128 (EAN-128) 2 of 5 Interleaved 2 of 5 m：0，1，3 Matrix 2 of 5...
  • Page 52 ISBN ISSN DataMatrix m: 0~6 PDF417 m: 0~5 Micro PDF417 m: 0~5 QR Code m: 0~6 Micro QR Code m: 0~6 第 52 页 共 70 页...

  • Page 53: Appendix 3 Invisible Character Ascii Table

    Appendix 3 Invisible character ASCII table 10 hex Corresponding character 第 53 页 共 70 页...
  • Page 54 第 54 页 共 70 页...

  • Page 55: Appendix 4 Visible Character Ascii Table

    Appendix 4 Visible character ASCII table Hexadecima Hexadecim Charac Hexadecima Charact 10 hex Character 10 hex 10 hex <SPACE> “ & ‘ 第 55 页 共 70 页...
  • Page 56 < > 第 56 页 共 70 页...

  • Page 57: Appendix 5 Default Setting Table

    Appendix 5 Default setting table Parameter name Default setting Remarks Communication settings Serial port baud rate 9600 Serial check bit No check bit TTL-232 Serial data bit 8 bit （default） Serial port stop 1 bit Host mode USB Keyboard layout American keyboard Barcode content contains carriage 0D only (enter character...
  • Page 58 Lighting mode Normal mode Aiming mode Normal mode Prompt output Power on tone prompt Beep type audio rate low Decoding success Beep volume high tone Beep duration long code read tone setting Allow Decoding success LED prompt Data editing Prefix and suffix Prefix adding No add Prefix content...
  • Page 59 Barcode symbol parameter Inverted barcode reading Open Valid for all bar code symbol types Code 128 Reading Allow Max length Min length GS1-128（UCC/EAN-128） Reading Allow Max length Min length EAN-8 Reading Allow EAN-13 Reading Allow 2 bit extension code No reading 5 bit extension code No reading must have the extension code...
  • Page 60 ISBN Reading Not allow UPC-E Reading allow Output check character Output Expand to UPC-A No expand UPC-A Reading allow Output check character Output UPC-A to EAN-13 Interleaved 2 of Reading allow Check No check Max length Min length Matrix 2 of 5 Read Not allow Max length...
  • Page 61 Reading allow Max length Min length Standard 2 of 5 Reading allow Check No check Output check character No output Max length Min length Code 39 Reading allow Check No check Output check character No output Default (off) Support Full ASCII Support Max length Min length...
  • Page 62 Check No check No output Send start character and end character Max length Min length Code 93 Reading allow Max length Min length GS1 Databar（RSS14）(Stacked) Reading allow send AI(01) character Send GS1 Databar Limited Reading allow Send AI(01) character Send GS1 Databar Expanded reading allow...
  • Page 63 Max length Min length Plessey reading Allow Check but don’t Check bit output Max length Min length MSI-Plessey Reading allow Output check Don’t output Check bit mode selection 1 bit MOD10 Max length Min length PDF417 Reading allow Max length 2710 Min length Micro PDF417...
  • Page 64 2710 Max length Min length QR Code Reading allow Max length 7089 Min length Micro QR Reading allow Max length 7089 Min length Data Matrix Reading allow Max length 3116 Min length 第 64 页 共 70 页...

  • Page 65: Appendix 6 Operational Character (Usb Keyboard)

    Appendix 6 Operational character (USB keyboard) No escape Escape corresponding character hexadecimal corresponding function key combination control key (Null char.) Null Ctrl+2 (Start of Header) Keypad Enter Ctrl+A (Start of Text) Caps Lock Ctrl+B (End of Text) Null Ctrl+C (End of Transmission) Null Ctrl+D (Enquiry)
  • Page 66 (XOFF) (Device Control 3) 13 Delete Ctrl+S (Device Control 4) tab+shift Ctrl+T (Negative Ctrl+U Acknowledgement) (Synchronous Idle) Ctrl+V (End of Trans. Block) Ctrl+W (Cancel) Ctrl+X (End of Medium) Ctrl+Y (Substitute) Ctrl+Z (Escape) Ctrl+[ (File Separator) Ctrl+\ 参见下表 Ctrl+] (Group Separator) (Request to Send) Ctrl+6 (Unit Separator)

  • Page 67: Appendix 7 Operational Character (Serial Port And Usb-Vcom)

    Appendix 7 Operational character (serial port and USB-VCOM) 10 hex Corresponding character 第 67 页 共 70 页...

  • Page 68: Some Feature Configuration Instructions And Examples

    Some feature configuration instructions and examples Example of custom prefix and suffix configuration Configure the barcode pre/suffix by scan code. Each prefix or suffix character can be up to 10.(To ensure that custom suffixes can be output, configure the scanner's custom pre/post suffix output option to be turned on.) Example 1.1: Add a custom prefix XYZ to all types of barcode.

  • Page 69: Barcode Length Limit Configuration Example

    Example 1.2：Add a custom prefix R to the QR code Query the appendix barcode type ID table,the HEX value of all code systems is 51.Query the visible character ASCII table,the HEX value corresponding to R is 58, 59, 5A. Scan the configuration code Customize The Prefix, then scan the appendix data and edit the 5, 1, 5, 2 in the barcode to save, that is, complete the configuration.
  • Page 70 1, 2, and save the barcode to complete the configuration. Example 2.2：Configure Interleaved 2 of 5 barcode length to 14 bits Configuring 14 bits of Interleaved 2 of 5 barcode length can scan directly and configure ITF25 14 bits of barcode lengths for configuration.It can also be configured by the maximum and minimum length of the barcode: Scan configuration code Interleaved 2 of 5 minimum length limit,then scan the appendix data and edit the 1, 4 in the bar code, save.

This manual is also suitable for:

Ep5000yEp6000yEp8000yEp7000y

Table of Contents