Keison CO75 User Manual

Carbon monoxide co meter

Advertisement

Quick Links

CO75 Carbon Monoxide (CO) Meter
1

Introduction

This CO Meter detects Carbon Monoxide (CO) from 0 to 1000 parts per
million (PPM)
2

Safety Information-Read First:

· Do not use the Meter as a personal safety monitor
· Learn and recognize the effects of CO poisoning
0-1PPM
9 PPM
35 PPM
100 PPM
200 PPM
800 PPM
*U.S. Department of Labour, Occupational Safety & Health
Administration (OSHA) Regulation 1917.24: The CO content in any
enclosed space shall be maintained at not more than 50 PPM (0.005%).
Remove employees from enclosed space if the CO concentration
exceeds 100 PPM(0.01%).
3

What the Meter Does:

The Meter indicates CO levels on its' LCD display and by a beeper.
The beeper clicks like a Geiger counter and changes depending on the CO
level:
- From 0 to 34 PPM, the meter makes no sound
- From 35 to 200 PPM, the beeper sounds discontinuously
- Above 200 PPM, the beeper sounds continuously
User Guide
Normal background levels.
ASHRAE Standard 62-1989 for living areas.
HSE enclosed space 8-hour average level.
OSHA exposure limit.*
Mild headache, fatigue, nausea and dizziness.
Dizziness, nausea and convulsions.
Death within 2 to 3 hours.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CO75 and is the answer not in the manual?

Questions and answers

Summary of Contents for Keison CO75

  • Page 1 CO75 Carbon Monoxide (CO) Meter User Guide Introduction This CO Meter detects Carbon Monoxide (CO) from 0 to 1000 parts per million (PPM) Safety Information-Read First: · Do not use the Meter as a personal safety monitor · Learn and recognize the effects of CO poisoning 0-1PPM Normal background levels.
  • Page 2 Specification Temperature Operating: 0 C to + 50 C Storage: -30 C to + 60 C Operating humidity 0-99% Relative humidity (non-condensing) Measurement range 0 to 1000 PPM Measurement 1 PPM Resolution Accuracy ±5% above 200 PPM, ±10 PPM below 200 PPM Warm up period <2 seconds Battery...
  • Page 3: Battery Replacement

    POWER Button Press POWER to turn on the meter. Press POWER again to turn it off After 15 minutes of inactivity, the meter automatically switches off to save battery life. MAX Hold Button This shows the highest reading recorded by the meter since being switched Press MAX hold to display the highest reading.
  • Page 4: Electromagnetic Compatibility

    EN 61000-6-3 EN 61000-6-1 and is certified to be compliant Specification EC/EMC/KI/CO75 details the specific test configuration, performance and conditions of use. Please Note : Batteries used in this instrument should be disposed of in accordance with current legislation and local guidelines.
  • Page 5 Tel: +44 (0)1245 600 560 Tel: +41 41 541 5877 Fax: +44 (0)1245 600 030 Fax: +41 41 541 5878 Email: Email: General Information/Sales: General Information/Sales: info@keison.com info@kesn.ch Accounts Department: Accounts Department: accounts@keison.com accounts@kesn.ch USA Office Latin America Office 233 Rogue River Highway #425...

Table of Contents