Technical Documentation waterfan HEATER v201905 Elements of HEATER devices : Casing made of highly resistant EPP (expended polyprophylene) material Regulated air–conduits Installation bracket 3 step axial fan 450 mm dimension; fan is protected from direct access to revolving elements with safety netting Heat exchanger –...
Page 4
Technical Documentation waterfan HEATER v201905 Mounting bracket to the heater The bracket set consist of: a holder, two sleeves, two M8 screws and washers. In order to mount the bracket, drill two Ø12- 13mm holes in places visibly marked on the casing.
The connection of the automatic control should be carried out in accordance with the electrical diagram. In case of any doubts or problems, unplug the device and contact the device’s installer or SONNIGER Authorized Service. 6. WATER INSTALLATION The installation of the unit should be done in a way enabling maintenance service;...
In case of any metallic knocks, vibration or increase in sound level check if the fan mounting/fixing does not work loose contact the installer or SONNIGER Authorized Service 11. MAINTENANCE The heat exchanger requires systematical cleaning all dirts /impurities off. Before the start of the heating period the heat exchanger is advised to be cleaned with compressed air directed to the air outlets;...
Technical Documentation waterfan HEATER v201905 13. ELECTRICAL CONNECTION DIAGRAMS 1. Connecting HEATER with no automatic control * The unit set does not consist of: a master switch, a fuse, a feeding cable Fan wiring description high speed – brown middle speed – grey low speed –...
Page 9
Technical Documentation waterfan HEATER v201905 3. Connecting HEATER units with INTELLIGENT panel. Panel Intelligent controls actuators/valves and automatically regulates fans’ speed depending on the required room temperature. Fans speed changs automatically for lower rate, when temperature in a room gets closer to desired one. Additional functions –...
Page 10
Technical Documentation waterfan HEATER v201905 5. Connection of HEATER unit with transformer speed regulator. * When using transformer speed regulator please use only maximum speed connector on a fan - U1 high speed...
Technical Documentation waterfan HEATER v201905 14. PANEL INTELLIGENT – programmable controller manual Panel Intelligent controls actuators/valves and automatically regulates fan’s speed depending on the required room temperature. Fans speed changes automatically for lower rate, when temperature in a room gets closer to desired one. Additional functions of Panel Intelligent: ...
Page 12
Technical Documentation waterfan HEATER v201905 SETTINGS MENU EXAMPLE SETTINGS of WEEKLY THERMOSTAT When Panel Intelligent is switched off, press and hold MODE for 3 seconds. Mon-Fri Saturday Sunday To change option use MODE button. To change value use +/- buttons. 1 06:00 ~ 08:00 17°C 17°C...
The Claimant is obliged to give a written confirmation of the service provided. SONNIGER is entitled to refuse the warranty service if SONNIGER has not received full payment for the product complained about under the Guarantee or any previous servicing activities.
Technical Documentation waterfan HEATER v201905 WARRANTY CARD INVESTMENT NAME……………………………………………………………….. Unit type………………………………………………………………………………………………… Unit number…………..………………………………………………………………………………. Purchase date….…………………………………………………………………………....Startup date……… ………………………………………………………………………………….. Installation company date: :……………………………………………………….. Name of startup Installer Company name..……………………………………………………………………………………….. ……………………………………………………………………………………………………………. Address:.……………………………………………………………………………..………………….. Phone..…………………………………………………………………………………………………… Signature of startup installer……………..:…………………………………………………………… Maitanance and repair registration: Stamp and signature Maitanance and repair description date of installation...
Need help?
Do you have a question about the HEATER ONE and is the answer not in the manual?
Questions and answers