Installing On A Network - Axis 213 Installing

AXIS 213 - Installing the AXIS 213
2

Installing on a Network

The AXIS 213 is designed for installation on an Ethernet network. This involves
assigning an IP address to the PTZ camera, either manually or via an automated
network service (DHCP). Select one of the following procedures depending on your
network:
Available procedures:
Manual Installation using AXIS IP Utility (Windows)
Manual Installation using ARP and Ping in Windows
Manual Installation using ARP and Ping in UNIX/Linux
AXIS Internet Dynamic DNS Service
Notes:
• The AXIS 213 has a default IP address - 192.168.0.90
• DHCP is enabled by default
AXIS Media Control (AMC)
AXIS Media Control (AMC) - an ActiveX component required for Microsoft Internet
Explorer which is installed automatically on first use.
AMC must be installed for audio support and for viewing live images in Microsoft
Internet Explorer. If your working environment restricts additional software
components, you can configure your AXIS 213 to use a Java applet for updating the
images (applies to video images, not audio). See the online help files under Live View
Config | Layout | Default Viewer for Internet Explorer. Or use another supported
Web browser.
Once AMC is installed, the AMC viewer toolbar will display the audio controls and
additional video controls.
English on German French
page: on page: on page:
page 3 page 9 page 15
page 4 page 10 page 16
page 5 page 11 page 17
page 6 page 12 page 18
Spanish Italian
on page: on page:
page 21 page 27
page 22 page 28
page 23 page 29
page 24 page 30