Si 8 8 6 x x ISO - E V B 1. Hardware Overview and Setup The default configuration of the Si886xxISO-EVB demonstrates the digital isolation capabilities of the installed Si88621ED-IS as well as its dc-dc converter performance. In this configuration, the dc-dc converter is enabled, the primary side digital supply is sourced by an external regulator circuit, and the secondary side digital supply is sourced by the output of the converter.
Si8 86 x xISO- E V B 2. Alternative Configurations 2.1. Disabling the DC-DC Converter The SH_FC input (U1 pin 7) disables the dc-dc converter. JP9 controls the SH_FC input, enabling the converter when pulled low, ON, and disabling the converter when pulled high, OFF. To disable the dc-dc converter, place the jumper in the OFF position on JP9.
Si 8 8 6 x x ISO - E V B 3. Quick Reference Tables Table 1. Test Point Descriptions Test Point Description Referenced to GNDA/GNDP GNDA/GNDP VOUT GNDB GNDB SHDN GNDA/GNDP TP19 COMP GNDB TP20 RSNS GNDA/GNDP TP33 GNDP Table 2.
Page 5
Si8 86 x xISO- E V B 4. Si886xxISO-EVB Schematics Rev. 0.1 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from...
Page 6
Si 8 8 6 x x ISO - E V B Rev. 0.1 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from...
Page 7
Si8 86 x xISO- E V B 5. Si886xxISO-EVB Layout Bottom Figure 3. Si886xxISO-EVB Layout Rev. 0.1 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from...
Si 8 8 6 x x ISO - E V B 6. Bill of Materials Table 3. Si886xxISO-EVB Bill of Materials Part Reference Description Manufacturer Manufacturer Part Number CAP, 10 μF, 50 V, ±20%, X7R, 1210 Venkel C1210X7R500-106M CAP, 10 μF, 10 V, ±20%, X7R, 1206 Venkel C1206X7R100-106M C5 C9 C12 C14...
Page 9
Si8 86 x xISO- E V B Table 3. Si886xxISO-EVB Bill of Materials Part Reference Description Manufacturer Manufacturer Part Number RES, 10K, 1/10W, ±1%, ThickFilm, 0805 Venkel CR0805-10W-1002F RES, 82.0 , 1/10W, ±1%, ThickFilm, 0603 Venkel CR0603-10W-82R0F RES, 69.8K, 1/16W, ±1%, ThickFilm, 0603 Venkel CR0603-16W-6982F RES, 10K, 1/10W, ±5%, ThickFilm, 0603...
Page 10
Si 8 8 6 x x ISO - E V B 7. Si886xxISO-EVB Ordering Guide Table 4. Si886xxISO-EVB Ordering Guide Ordering Part Number (OPN) Description Si886xxISO-KIT Si886xx dc-dc digital isolator evaluation board kit Rev. 0.1 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Page 11
Trademark Information Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, Clockbuilder®, CMEMS®, DSPLL®, EFM®, EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®, ISOmodem®, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress®...
Need help?
Do you have a question about the Si886 Series and is the answer not in the manual?
Questions and answers