Shark Lift-Away NV800C Series Instructions Manual page 5

SAVE THESE INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE
DUST CUP/FILTERS/ACCESSORIES
Before turning on the vacuum:
20 Make sure that all filters are thoroughly dry
after routine cleaning. DO NOT use without
dust cup and/or filters in place.
21 Make sure accessories are free of
blockages.
22 Only use Shark
-brand filters and
®
accessories. Using other brands will void
warranty.
HOSE ATTACHMENTS
23 DO NOT use if airflow is restricted. If the air
paths or the motorized floor nozzle become
blocked, turn the vacuum cleaner off and
unplug from electrical outlet. Remove
all obstructions before you turn on the
unit again.
24 Keep the end of the hose and accessory
openings away from face and body.
25 Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
26 Only use manufacturer's recommended
attachments.
GENERAL CLEANING
27 DO NOT vacuum up large objects.
28 DO NOT vacuum up hard or sharp objects
such as glass, nails, screws, or coins that
could damage the vacuum cleaner.
29 DO NOT vacuum up drywall dust,
fireplace ash, or embers. DO NOT use
as an attachment to power tools for dust
collection.
30 DO NOT vacuum up smoking or burning
objects such as hot coals, cigarette butts,
or matches.
31 DO NOT vacuum up flammable or
combustible materials (e.g., lighter fluid,
gasoline, or kerosene) or use vacuum in
areas where they may be present.
32 DO NOT vacuum up toxic solutions
(e.g., chlorine bleach, ammonia, or drain
cleaner).
33 DO NOT use in an enclosed space
where vapors are present from paint,
paint thinner, moth-proofing substances,
flammable dust, or other explosive or toxic
materials.
34 DO NOT vacuum up any liquids.
35 DO NOT immerse vacuum cleaner in water
or other liquids.
36 Use extra care when cleaning on stairs.
POLARIZED PLUG
To reduce the risk of electric shock, this
vacuum cleaner has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit into a polarized outlet
only one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force
into outlet or try to modify to fit.
s h a r kc l e a n . c o m
4