Table of Contents
Advertisement
9. Install the front auger carrier assembly
q
auger mount
and secure into position using
t
supplied hitch pin
10. Install the rear auger carrier assembly
w
auger mount
and secure into position using
t
supplied hitch pin
r
into front
.
e
into rear
.
Instr 9927953
11. Place auger onto front and rear mount with the
powerhead of the auger towards the front of the
machine and ensure that the auger shaft is fully
seated into the front and rear V-groove supports.
The Titan Ice Auger Carrier Kit comes assembled to
accept augers that operate in a clockwise (right
hand) rotation. If your auger operates in a
counterclockwise (left hand) rotation you will need to
replace the standard rear strap plate
optional LH rear strap plate
your kit. See Step 11a-11c for installation of the
optional LH rear strap plate.
a. To install the LH rear auger strap plate, PN
5264841, remove the fasteners
the RH rear auger strap plate assembly in
place.
You will need to remove the strap
mechanism
plate and install onto the LH rear auger plate strap.
Rev 01 2017-07
Page 5 of 8
NOTE
u
that was supplied with
NOTE
M
from the standard rear auger strap
H
with the
J
K
/
holding
L
and latch
Advertisement
Table of Contents
