Assembly Instruction; Guarantee Regulations - Profi-pumpe TERRA-2 Operating Instructions Manual

4 English

5. ASSEMBLY INSTRUCTION

5.1 Attach iron adaptor tube 5.2 Attach cascade frame to
to the frame base
Iron adaptor tube
Frame base
adaptor
5.4 Attach water pipe to top jar 5.5 Attach the pipe to the
with a provided rubber bung
Top jar
Water pipe
Water pipe
Rubber bung
5.7 Attach pump to water pipe and 5.8 Add appropriate amount of clean
put the pump into the big bowl
Pump LED light
5.10 Twist pump plug slightly and pushing it into
the pump socket. Make sure the sealing ring
is fully in groove
Solar panel
5.3 Secure the cascade frame to the
the iron adaptor tube frame base with a provided screw
Cascade
frame
Iron
tube
5.6 Place the big bowl and 3 small
iron frame bowls onto iron frame as shown
Big bowl
Iron frame
5.9 Join bracket, tube and spike
water into big bowl. Make sure the together, then attach bracket to
pump is fully submerged in water back of the solar panel as shown
Solar panel
Bracket
Tube
Spike
Pump power cord
Pump socket
Pump plug
6. PERFORMANCE
The performance of the pump depends on the orientation of the solar panels toward the sun and the intensity of.
The max. Data obtained under optimal conditions. Function in the shade or on cloudy days can not be guaranteed.
In models with battery operation depends on the function of the battery is charged.
7. SECURITY TIPS
l Obey absolutely valid regulations on the electrical security
l Never run pump dry
l Pumping inflammable, as well as all other aggressive liquids is prohibited
l Pay attention to the medium max. 40°C
Cascade
l Any altering of the product itself or changing of the components is forbidden.
frame
l With longer unused times, clean the pump, wash it out with clear water, dry and store it at room tempe-
rature
l Do not connect the pump to any AC voltage power directly, it's ONLY for DC Voltage power.
Screw
l Operate the pump in freshwater or saltwater only (never above 50°C), especially keep it away from
Frame
flammable liquids.
base
l All solar panels are very sensitive, protect it before all against external mechanical influences (shock,
vibration, etc.)
The manufacturer explains:
l To take over no responsibility in the case of accidents or damages on the basis of carelessness or disregard to the
instructionsin this book.
l to reject every responsibility for the damages which originate from the improper use of the pump
Small
bowls
8. SERVICING
If after some time the pump starts losing power or stops working, please clean up sediment in the pump shell or filter
cribs. Kindly note the pump can be opened by pressing down at the bottom of the filter housing. To clear the impeller,
open the pump housing at the front by sliding up the front plastic cover.
The solar module should only be
cleaned with soft tissue or propriety
glass cleaning solution.
1. Front case
2. Filter
3. Impeller cover
4. Impeller
5. Pump

9. GUARANTEE REGULATIONS

For all manufacturer defects and material defects we grant the legal guarantee time (new and unused product). In
such cases
we take over the exchange or the repair of the pump. Forwarding expenses are not carried by us.
The guarantee is not valid with:
l Material wear (sealing rings, impeller wheels, impeller chambers)
l Unjustified interventions or changes in the pump
l Damages by selffault
l Improper servicing and improper use
l DRY RUN (Also partially!) of the pump
Moreover, we give no damage compensation for secondary damages!
Pull off filter cover as shown Remove filter and rinse in water
Open impeller cover, then Rinse all parts thoroughly in water
impeller can be easily removed
English 5