Philips DVDR75/051 Operating Instructions Manual page 73

In ' ' use SELECT to select from the following options:
: Repeated daily recordings from Monday to Friday
: Repeated weekly recordings (every week on the same day, e.g.
Monday).
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('
' input field using TIMER . Using SELECT switch on
Select the '
'VPS/PDC' (' ' lights up). If you press SELECT again, you will switch
'VPS/PDC' off (' ' goes out).
' input field using C .
Select the '
Use SELECT to select the recording mode.
6
If all information is correct, press the OK button. The programming
information is stored in a TIMER block.
7
To end, press TIMER .
8
Insert a DVD (one without write protection).
The disk you have inserted will be checked.
9
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been
If any of the TIMER blocks are in use, '
') or EXT 2 AUX-I/O (' ').
using the STANDBY m button.
' will light up on the recorder display.
Programming a recording (TIMER)