Related Manuals for Datapath ARQA Series
Summary of Contents for Datapath ARQA Series
- Page 1 Quick Start Guide Arqa TX1/C Arqa TX1/F Arqa RX1/C Arqa RX1/F Engineering the world’s best visual solutions...
- Page 2 Arqa Quick Start Guide CONTENTS Thank you for purchasing the Datapath Arqa TX1 or RX1 units. The aim 1 x Arqa TX1 unit, or of this document is to quickly guide you 1 x Arqa RX1 unit through the process of initial setup.
- Page 3 Arqa Quick Start Guide ARQA RX1 (RECEIVER UNIT) RACK MOUNT KIT (OPTIONAL) 1 x wall power supply unit 12V 1A 1 x rack shelf (European or International plug) 2 x mains power cables 1 x rubber feet (incl 4 pcs) 1 x faceplate 1 x mounting pad (incl 4 pcs) Redundant Power Supply Unit (RPSU)
- Page 4 Arqa Quick Start Guide STEP 1 CONNECTING THE ARQA RX1/C AND TX1/C COPPER UNITS Audio to PC USB to PC DVI in Audio from PC from PC TX1/C Local DVI - In RS232 Local DVI - Out Network cable CAT5e/6. Up to 150m/492ft KVM - Link DVI out to Monitor...
- Page 5 Arqa Quick Start Guide STEP 1 CONNECTING THE ARQA RX1/F AND TX1/F OPTICAL UNITS Audio to PC USB to PC DVI in Audio from PC from PC TX1/F Local DVI - In RS232 Local DVI - Out Network cable Multi-mode Fiber. Up to 500m/1640ft KVM - Link DVI out to Monitor...
- Page 6 Arqa Quick Start Guide Connect the Arqa RX1 and the TX1 as follows using the connection illustrations as a guide: Connect both the Arqa RX1 and the TX1 to the 12V 1A power supply provided. Connect the USB cable (provided) to a USB port on the PC and to the USB port on the Arqa TX1. Connect a keyboard and mouse to the USB ports on the Arqa RX1.
-
Page 7: Step 3 Operation
Start up a point-to-point connection (without a network switch) The start up for a point-to-point connection is the same whether you are using the Copper or Fiber version of the Datapath Arqa. Ensure all connections between the PC, Arqa TX1 and the RX1 are sound. - Page 8 The start up for a network switch connection is the same if you are using the Copper or Fiber version of the Datapath Arqa. Plug all units into the Network Switch using network cables. A Windows based PC containing the Arqa Network Manager software should also be connected to the network switch.
-
Page 9: Step 4 Troubleshooting
‘Out’ socket on the Arqa TX1. Connect the Arqa RX1 ‘In’ to the microphone. LED displays The screen flickers, has Download and install the latest firmware from the Datapath Green. an abnormal display. website. The Arqa RX1 and TX1... -
Page 10: Copyright Statement
COPYRIGHT STATEMENT © Datapath Ltd., England, 2019 Datapath Limited claims copyright on this documentation. No part of this documentation may be reproduced, released, disclosed, stored in any electronic format, or used in whole or in part for any purpose other than stated herein without the express permission of Datapath Limited. - Page 11 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Datapath Ltd declares that the Arqa KVM units comply with the essential requirements and other relevant provisions of Directives 2014/30/EU and 2014/35/EU A copy of our Declaration of conformity is available on request.
- Page 12 Datapath UK and Corporate Headquarters Bemrose House, Bemrose Park, Wayzgoose Drive, Derby, DE21 6XQ, United Kingdom +44 (0) 1332 294 441 sales-uk@datapath.co.uk Datapath North America 2550 Blvd of the Generals, Suite 320, Norristown, PA 19403, USA +1 484 679 1553 sales-us@datapath.co.uk...