SuperKlean
INSTALLATION AND MAINTENANCE INSTRUCTIONS
**SAVE AND DISPLAY PROMINENTLY WHERE THIS EQUIPMENT IS USED**
HIGH PRESSURE AND HOT LIQUID SPRAYS CAN CAUSE SERIOUS BODILY INJURY.
CAUTION: THIS UNIT IS DESIGNED FOR HOT & COLD WATER ONLY. IMPROPER USE,
INSTALLATION OR MAINTENANCE CAN RESULT IN SERIOUS INJURY.
INSTALLATION AND MAINTENANCE SHOULD ONLY BE DONE BY A QUALIFIED
PROFESSIONAL. SUPERKLEAN IS NOT LIABLE FOR ANY INJURY THAT IS A RESULT OF
IMPROPER USE, INSTALLATION OR MAINTENANCE.
NEVER
nozzle spraying and during
nozzle spraying
ALWAYS
BEFORE removing nozzle — OR —
attempting service
ALWAYS
• Do not operate the equipment if there are any leaks from spray nozzle, fittings, or hoses. High pressure leaks can
penetrate the skin causing serious injury.
1 Edwards Court, Suite 101, Burlingame, CA 94010
Washdown Products
3600 Hot & Cold Mixing Unit
**DO NOT THROW AWAY AFTER INSTALLATION**
WARNING
BEFORE
STAY SAFE!
www.superklean.com
• Never allow children or unauthorized personnel to handle
equipment.
• Never put your hand or fingers in front of nozzle.
• Never point nozzle at your body — or anyone else.
• Never leave wash down station unattended without
releasing pressure.
• Never use foreign means to hold trigger in open position.
• Never over tighten connections/threads. Use appropriate
size wrench for tightening connections/threads. Never use
wrench extensions of any type.
• Hold nozzle firmly before pulling trigger.
• Adopt a proper body stance to anticipate high recoil force by
spray nozzle.
• Exercise care and caution when spraying.
• When spraying hot liquids avoid hand or body contact with
non-insulated parts of the nozzle.
• Wear protective clothing including heavy- duty insulated
gloves, boots, aprons and safety glasses.
• Stop spraying before becoming fatigued.
• Shut off water supplies.
• Discharge contents of hose and nozzle to eliminate
pressure.
•
Tel. (800) 769-9173 or (650) 375-7001
email: sales@superklean.com
February 2012
•
Fax (650) 375-7010
Need help?
Do you have a question about the 3600 Series and is the answer not in the manual?
Questions and answers